Anodyne Therapy Freedom 300 Veiligheidsinformatie en toepassingsinstructies - Pagina 17

Blader online of download pdf Veiligheidsinformatie en toepassingsinstructies voor {categorie_naam} Anodyne Therapy Freedom 300. Anodyne Therapy Freedom 300 20 pagina's.
Ook voor Anodyne Therapy Freedom 300: Handmatig (20 pagina's)

Anodyne Therapy Freedom 300 Veiligheidsinformatie en toepassingsinstructies
s
ummary
Set Up: Plug Power Supply into an electrical outlet and depress
the On/Off Switch on the Control Unit to the On position. If the
Green Indicator Light turns on the device is operational. Turn
the On/Off Switch to the Off position.
Put the Calf Treatment Pad over the back of your calf:
Loosen the top and bottom Attachment Straps; slide over your
foot onto your bare calf (no not use socks or stockings); and
tighten the Attachment Straps and press Velcro ends to hold in
place.
Put the Foot Treatment Pad on the bottom of your foot: Detach
the Back Attachment Strap of the Sandal; slide your bare forefoot
(do not wear socks or stockings) into the Front Attachment Straps
and tighten; wrap Back Strap around the back of your heel and
fasten Velcro end onto the Front Attachment Straps to hold in
place.
!
Warning: Do not over tighten Attachment Straps or stand on
Foot Treatment Pad as this may increase risk of burns.
Turn on Control unit to begin treatment: Depress the On/Off
switch on the Control Unit to begin treatment (note: the green
indicator light will turn green for 30 minutes. The unit will
automatically turn off after 30 minutes of operation.Remove at
the end of the 30 minutes (when the unit turns off ).
Warning: Immediately remove Treatment Pads if they feel too
!
warm for comfort as you may be at an increased risk for burn.
Remove Treatment Pads at the end of treatment: Loosen
Attachment Straps of the Calf and Foot Treatment Pads and
slip off of the leg and foot. Turn off Control Unit, unplug from
electrical outlet, and store in a safe place away from children
and pets.
Basic Operating Instructions
17