Daikin VAM1000HVE Bedieningshandleiding - Pagina 16
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Daikin VAM1000HVE. Daikin VAM1000HVE 20 pagina's. Total heat exchanger, heat reclaim ventilator
Pagina afdrukken
CHECK THE FOLLOWING BEFORE REQUESTING
FOR SERVICE.
• The unit does not operate at all.
<Cause>
Check if there is a power failure.
<Measure>
After power has been restored, start operation
again.
<Cause>
Check if the fuse has blown.
<Measure>
Turn the breaker off and contact your dealer.
<Cause>
Check if breaker switch in the off position or in the
trip position.
Power supply (circuit) breaker
<Measure>
• Turn the power on if the breaker switch is in the
off position.
• Do not turn the power on if the breaker switch is
in the trip position. Contact your dealer.
<Cause>
Is "Under centralized control" indication displayed
on the remote control?
<Measure>
It is normal. Operate the unit with the centralized
controller.
• Small volume of discharged air and the sound
is loud.
<Cause>
Check if the air fi lter and heat exchange element
are clogged.
(Check both SA and RA air fi lter. Check both sides
of elements.)
<Measure>
Clean the air fi lter and heat exchange element.
Refer to Page 6 and 7.
• Large volume of discharged air and the sound
is loud.
<Cause>
Check if the air fi lter and heat exchange element
are not installed.
<Measure>
Install the air fi lter and heat exchange element in
the correct position.
9
Knob
ON
Trip
OFF
If one of the following malfunctions occurs,
contact Daikin dealer.
WARNING
• When the unit presents abnormal conditions
(burnt smell, etc.), stop the operation and turn
the breaker off.
Continued operation under such circumstances
may result in a failure, electric shock, or fire.
Contact your dealer.
Symptom
A safety device such as
a fuse, a power supply
breaker, or an earth
ON/OFF switch does not
properly work.
There are other
malfunctions or failures.
"Error" or "Alarm"
message blinks.
<List of error codes>
Operation
Error
lamp
code
Blinking
61
ON
64
ON
65
ON
6A
Blinking
6A
Blinking
U5
OFF
U5
Blinking
U8
Blinking
UA
ON
UC
Blinking
UE
** : T he unit may still operate in the case of a
malfunction with the error code in white letters on
the black background. However, be sure to check
the display and contact your dealer as soon as
possible.
Take the measures
shown below and then
contact your dealer
Turn the power off.
Turn the power off.
Stop the unit.
Check the error code.
Description
Supply voltage error
Indoor air thermistor
malfunction
Outdoor air thermistor
malfunction
Damper-related malfunction
Damper-related malfunction
+ thermistor malfunction
Transmission error between
the unit and remote control
Setting error of remote
control
Transmission error between
main and sub remote
controls
Incorrect combination of
the unit and remote control
Overlapped central control
address
Transmission error between
the unit and centralized
controller