Anova T2237T Montage-instructies - Pagina 2
Blader online of download pdf Montage-instructies voor {categorie_naam} Anova T2237T. Anova T2237T 2 pagina's. Tuscany 36” bristro tables
Ook voor Anova T2237T: Montage-instructies (2 pagina's)
Pagina afdrukken
4. Locate one of the table legs. Position the leg so
that the tab holes align with the table support holes
inside on both ends. Place a 1/4" flat washer on a
1/4"-20 x 1/2" thread cutting pan head Phillips screw.
Insert a screw with washer into each tab and tighten
using a #3 screwdriver.
5. Install the second leg in the same manner.
6. Adjust the leveling feet on the legs as needed.
NOTE: Pl ea se contact Customer Ca re a t 1-866-797-1761 for assistance in placing a replacement part order.
7/31/2019
¼"-20x1/2" Threa d Cutting Pan Head
Phi l lips Screws
Copyri ght 2019 ANOVA®
¼"-20 x ½" Threa d Cutti ng
Pa n Head Phillips Screws
Ma nufactured i n the U.S.
Legs
¼" Fl a t Washer
Legs
¼" Fl a t Washer
Ta bl e Top
2