Anova MG3514 Instructie- en gebruikershandleiding - Pagina 9

Blader online of download pdf Instructie- en gebruikershandleiding voor {categorie_naam} Anova MG3514. Anova MG3514 19 pagina's.

7. Tighten the lock nut with the tip of the bar held (12 ~ 15 Nm). Next, check the chain for smooth rotation and

proper tension while moving by hand.

8. Check the tension of the saw chain. Use your hand to lift the chain link positioning it at the center of the cut

length with approximately 10N force. If the chain link slips off the entire bar rail, the chain needs to be tightened.

It is very important to maintain proper chain tension. Rapid wear of the guide bar or chain can be caused by

improper or poorly adjusted tension. Especially when using a new chain, take good care of it, as you should check

it often to avoid such problems.

CAUTION WITH KICKBACK!

Kickback can occur when working with the machine. Do not rely solely on the safety devices built into your

chainsaw. As a chain saw user, you will need to take some steps to keep yourself and other people and animals

around you safe.

With a basic understanding of recoil, you can reduce or eliminate the element of surprise. Sudden kickback

contributes to accidents. Therefore, we recommend that you always keep a good, firm grip on the chainsaw with

1. Nut

2. clutch cover

3. shock claw

4. Threaded screw