DS Produkte 06594 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DS Produkte 06594. DS Produkte 06594 11 pagina's.

Pagina afdrukken

■

If the product does fall in water, immediately disconnect the

power supply. Do not attempt to pull the product out of the

water when it is connected to the mains supply!

■

Never touch the product, the adapter, the mains cord and the

plug with wet hands when the product is connected to the

mains.

■

Turn the product off and pull the mains plug out of the socket

– when you are not using the product,

– if a fault occurs during operation,

– before a storm,

– before you clean and/or stow the product.

■

Always pull on the plug itself and never on the mains cord!

■

Only use the product in enclosed areas.

■

Do not use the product in rooms containing easily ﬂ ammable

dust or toxic and explosive vapours.

■

Do not operate the product in a very moist environment or in

the vicinity of ﬂ ammable material.

■

Only use the product if it is correctly assembled and the

product, the remote control, the adapter, the cable or plug do

not exhibit any visible damages. Do not use the product if it

malfunctions, has fallen down or in water.

■

For your own safety, check the product for damages each time

before using it. Only use the product if the product, the adapter,

mains cord and the plug do not exhibit any damages!

■

Never leave the product unattended when it is switched on or

plugged in to the mains supply.

■

Do not make any modiﬁ cations to the product. Also do not

replace the mains cord yourself. Only have the product,

adapter, cord and plug repaired by a qualiﬁ ed workshop.

Contact customer service if necessary. Improper repairs could

pose serious risks for the user.

Proper handling of batteries

■

Before inserting the battery, make sure that the contacts in

the battery compartment and on the battery are clean and, if

necessary, clean them.

■

Only use the battery type speciﬁ ed in the technical data (see

section "Technical data").

■

When changing batteries ensure correct polarity (+/–).

■

Remove the battery from the battery compartment if it is empty

or if you are not using the product. This way, you can avoid

damages attributed to leaking.

■

If a battery has leaked, avoid contact between your skin, eyes

and mucous membranes and the battery acid. In the event of

contact with the battery acid, rinse the affected areas instantly

with plenty of clean water and immediately consult a physician.

■

Immediately remove any leaking batteries from the battery

compartment. Clean the contacts before you insert a new

battery.

■

The battery may not be charged or reactivated with other

means, may not be disassembled, disposed of in ﬁ re, im-

mersed in a liquid or short-circuited.

Damage to material, property and the device

■

Always place the product on a dry surface at a sufﬁ cient

distance to ﬂ ammable objects and sources of heat like

stovetops, ovens, heaters. Do not place any open ﬂ ames, e.g.

burning candles, in the direct vicinity of the product.

■

Do no place any containers ﬁ lled with liquids, e.g.vases, on or

directly next to the product.

■

Do not subject the product to extreme temperatures, severe

changes in temperature or direct sunlight.

■

Do not place any heavy objects on the product.

■

Make sure that the connector cable does not get pinched,

kinked or laid over sharp edges and does not come into con-

tact with hot surfaces.

■

The product may not be used if it exhibits visible damages.

Do not use the product if it had a malfunction or liquid has

penetrated the product.

■

Do not expose the product to severe shocks.

■

Do not use corrosive or abrasive cleaning products to clean

the product. They could damage the surface. When needed,

wipe the product off with a soft, dry cloth.

Product contents

•

1 x daylight lamp with built-in control panel

– 1 x base with barrel connector socket and adapter port

– 1 x tube with outside thread

– 1 x tube with recess for locking screw

– Lamp head with movable neck and control panel including

cable with barrel connector

– 1 x locking screw

•

1 x adapter

•

1x remote control including 3 V type CR2032 button cell

(inserted)

Remote control

Start-up

ATTENTION!

■

The plastic foils and bags pose a suffocation hazard! Keep

children and animals away from the packaging material.

•

Unpack the product contents and make sure that they are

complete (see chapter "Product contents") and check for any

damages from transport. If the product, plug or mains cord

exhibits damages, do not use the product (!); instead contact

customer service.

•

Before you use the product, remove all packaging material and

any labels located on the product and which serve to provide

protection during transport or are for advertising purposes.

Assembly

1. Pull the cable on the lamp head through the two extension

tubes. In the process make sure that you pull it through the

tube with the outside thread ﬁ rst and then through the tube with

the recess for the locking screw.

2. Tighten the tube with the outside thread on the lamp head.

3. Tighten the tube with the recess for the locking screw on the

tube with the outside thread.

4. Connect the port in the base to the barrel connector on the

cable.

5. Insert the tubes in the base.

6. Secure the tubes using the locking screw. Make sure the screw

is located in the recess of the base.

Instructions

comprising:

1 AN/AUS switch (ON/OFF)

2 Warm white light

3 Tageslicht (daylight)

4 Farbe (colour)

5 Farbwechsel

change), all colours

6 Control panel for colour

selection (12 mixed col-

ours)

7 RGB setting (red, green,

blue)

8 Increase/decrease

brightness

(colour

the