DS18 JK-HARNESS Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DS18 JK-HARNESS. DS18 JK-HARNESS 16 pagina's.

1. SPEAKER HARNESS: connect this to the "Front" amplifier (Wh: CH1+, Wh/Bk:

CH1-, Gy: CH2+, Gy/Bk: CH2-, Gr: CH3+, Gr/Bk: CH3-, Vt: CH4+,

Vt/Bk: CH4-).

2. SOUNDBAR SPEAKER HARNESS: connect this to the "Roof" amplifier

(Wh: CH1+, Wh/Bk: CH1-, Gy: CH2+, Gy/Bk: CH2-, Gr: CH3+, Gr/Bk: CH3-,

Vt: CH4+, Vt/Bk: CH4-) .

3. "FRONT" AMPLIFIER AUDIO SIGNAL CONNECTOR: if you are using the

factory radio (without RCA pre-output) connect this direct to hi-level input

connector in the amplifier (do not use the RCA), if you are using an aftermarket

radio (with RCA pre-output) connect this using the supplied RCA connector

and connect this to the amplifier RCA input.

4. "ROOF" AMPLIFIER AUDIO SIGNAL CONNECTOR: if you are using the

factory radio (without RCA pre-output) connect this direct to hi-level input

connector in the amplifier (do not use the RCA), if you are using an aftermarket

Radio (with RCA pre-output) connect this using the supplied RCA connector

and connect this to the amplifier RCA input.

5. "FRONT" AMPLIFIER POWER WIRES, RED: Positive from battery, Black:

Negative Ground, Blue: Remote from radio.

6. "ROOF" AMPLIFIER POWER WIRES, RED: Positive from battery, Black:

Negative Ground, Blue: Remote from radio.

7. "SUBWOOFER" AMPLIFIER POWER WIRES, RED: Positive from battery, Black:

Negative Ground, Blue: Remote from radio.

8. "SUBWOOFER" AMPLIFIER AUDIO SIGNAL CONNECTOR: if you are using

the factory radio (without RCA pre-output) connect this direct to hi-level input

connector in the amplifier (do not use the RCA), if you are using an aftermarket

radio (with RCA pre-output) connect this using the supplied RCA connector

and connect this to the amplifier RCA input.

9. DS18 HARNESS AMPLIFIER SIDE.

10. DS18 SOUNDBAR HARNESS AMPLIFIER SIDE.

11. RGB LED LIGHTS FROM THE SOUNDBAR: connect this to the LED-BTC

module. (LED-BTC sold separately)

12. GROUND WIRE: connect this to a factory ground chassis bolt.