DSC PC255O Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DSC PC255O. DSC PC255O 8 pagina's.
Ook voor DSC PC255O: Gebruiksaanwijzing (17 pagina's), Handleiding met veelgestelde vragen (18 pagina's)

Pagina afdrukken

1. Programming Additional Access Codes

PROGRAMMING ADDITIONAL ACCESS CODES

Up to 15 access codes in addition to the Master Code can be entered from the

keypad.

Enter [ ][5][Master Code]. The "Program" light will flash and the zone lights will

show which of codes 1 to 8 have already been programmed. To enter a new

code or change an existing code, first press the code number (1 to 8) and then

enter your [4 digit] code. To erase a code, press [

code. Note that the [ ] and [#] keys cannot be used in a code.

For codes 9 to 16, after entering [ ][5][Master Code], press [9]. The "Ready",

"Armed"and "Program" lights will flash and the zone lights 1 to 8 will indicate

which of codes 9 to 16 have been entered. As above, to change or enter a code,

select the code by pressing 1 to 8 and then enter your [4 digit] code. Entering

[

] erases a code. Pressing [9] again will change back to codes 1 to 8.

Pressing [#] returns you to ready mode. Access Code 16 ([ ][5][Master

Code][9][8][4 digits]) can be set up by your installer to be used by a maid or

other service personnel one time only. Each time you enter this code, it can be

used to disarm your system but is erased when used to arm the system, ensuring

just one-time access.

QUICK-ARM FEATURE

When the Quick-Arm feature is enabled, the panel may be armed simply by

entering [ ][0] instead of a 4 digit code. The [ ][0] command will not disarm the

panel.

Enter [ ][6][Master Code][4] to turn ON and OFF the Quick-Arm feature. When

the command is entered, the keypad will beep 3 times if the feature is being

enabled and will sound one long beep if the feature is being disabled.

Press [#] to return to Ready.

QUICK EXIT OPTION

This feature, if selected by your installer, allows one exit with the system armed

without affecting its current armed status.

Pressing [ ][0] gives you 2 minutes to exit if you have already armed the system.

This is useful if you want to exit while preserving the protection for someone left

on the premises. Once you have exited, the system will be armed as before. If

the zone is open after 2 minutes or there has been more than one exit, the pre-

alert will sound.

DOOR CHIME FEATURE

The door chime feature is used, while the panel is disarmed, to provide a tone

from the keypad each time a door or window is opened or closed. The doors and

windows which will provide this indication are programmed by your installer.

Enter [ ][6][Master Code][6] to turn the door chime feature ON and OFF. When

the command is entered, the keypad will beep 3 times if the feature is being

enabled and will sound one long beep if the feature is being disabled.

] instead of a [4 digit]

ALARM TEST

Enter [ ][6][Master Code][8] for a 2 second test of the keypad lights, keypad

sounder and alarm bells.

ENTERING ACCESS CODES SUMMARY:

[ ][5][Master Code]...

[1 to 8] [4 digits] Programs first group of 8 codes

[9] [1 to 8] [4 digits] Programs second group of 8 codes

[9] Returns to first group of 8 codes

[#] exits to the Ready mode

USER FUNCTIONS COMMAND SUMMARY:

[ ][6][Master Code]...

[4] Quick-Arm Enable/Disable

[6] Door Chime Enable/Disable

[8] Bell Test Function

KEYPAD ZONES

There are three zones which can be activated from the keypad. These zones

may or may not be active on your keypads depending on how your installer has

programmed them.

[F] Key: Keypad FIRE zone. Pressing this key for 2 seconds will activate the

keypad fire zone and the bell/siren output will pulse ON and OFF.

This zone is annunciated by the "Fire" light on the keypad.

[A] Key: Keypad AUXILIARY zone. Pressing this key for 2 seconds will

produce a series of beeps on the keypad along with the

transmission. To confirm transmission, the keypad sounder will

beep 6 times.

[P] Key: Keypad PANIC zone. Depending on how your installer programs

the panel, pressing this key for 2 seconds may produce a

completely silent alarm or an audible alarm along with the

transmission. If programmed as audible, the alarm bell will ring.

MAINTENANCE

With normal use, the system requires minimum maintenance. The following

should be observed:

1. Do not wash the keypad with a wet cloth. Light dusting with a barely damp

cloth should remove normal accumulations of dust.

2. The battery/bell test is designed to determine battery condition, however it is

recommended that the stand-by battery be replaced every three years.

3. For other system devices such as smoke detectors, passive infrared,

ultrasonic or microwave motion detectors or glassbreak detectors, consult

the respective manufacturer's literature for testing and maintenance.