DSC PC500RK Gebruiksaanwijzing - Pagina 8
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DSC PC500RK. DSC PC500RK 14 pagina's. With pc5oork keypad
Ook voor DSC PC500RK: Gebruiksaanwijzing (16 pagina's), Gebruiksaanwijzing (16 pagina's), Gebruiksaanwijzing (13 pagina's)
Pagina afdrukken
Your installer will inform you of how the Utility Output function is set up for your system.
ARMING OPTIONS
About Home-Away Zones
Some zones on your system may be programmed as Home-Away Zones so that you may use the Arming Options
described on this page. Home-Away Zones feature the ability to be automatically bypassed when the
commands described below are entered; this saves you the trouble of having to manually bypass zones using
the [ ][1][Access Code] Bypass command.
Your installer will inform you of which zones on your system are programmed as Home-Away Zones.
At-Home Arming
At-Home Arming automatically bypasses the Home-Away Zones on your system, and removes the Entry
Delay from the Entry-Exit Zones. This feature allows you to arm the system and remain on the premises.
In addition, if any of the Entry-Exit doors are opened, an alarm will sound instantly.
To use At-Home Arming, enter [ ][9][Access Code] on the keypad. The "Armed" light will FLASH to
remind you that there is no Entry Delay on the Entry-Exit doors.
Home-Away Arming
Home-Away arming automatically bypasses the Home-Away Zones; the Entry Delay will still apply to the
Entry-Exit zones. You may use this feature to arm the system and remain on the premises. Another
household member would still be able to enter the premises through the Entry-Exit door without causing
an alarm. When the Entry-Exit door is opened, an Access Code would have to be entered to disarm the
system.
To arm the system with Home-Away Arming, enter an Access Code and do not open the Entry-Exit door.
When the Exit Delay expires, the system will be armed with the Home-Away Zones automatically bypassed.
Quick-Arm
The Quick-Arm feature allows you to enter [ ][0] to arm the system. This command is designed to allow
someone to arm the system without that person having to be provided with an Access Code. When [ ][0]
7