ANSI PCGS 30FTLE-SK Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} ANSI PCGS 30FTLE-SK. ANSI PCGS 30FTLE-SK 14 pagina's.

After a Fall: Components which have been subjected to the forces of arresting a fall must be removed from service and

destroyed. Retractable must be returned for servicing to SAFE KEEPER or an authorized repair center.

Rescue: The employer must have a rescue plan when using this equipment. The employer must have the ability to perform

rescue quickly and safely.

21.

INSTALLATION REQUIREMENTS: The following requirements outline the proper installation procedures to be followed

Location:

Select a location on an appropriate strength anchorage that will provide overall safety and proper loading. The anchorage

must be free of deformities or defects that may weaken the structure. The anchorage to which the SRL is attached must be

capable of sustaining static load in the directions applied by the personal fall arrest systems of at least 3,600 lbs. with

certication of a qualied person, or 5,000 lbs. without certication.

When more than one person is attached to the same structure, the strength requirements stated above must be multiplied

by the number of personal fall arrest systems.

Do not work above the anchorage point. While using an SRL, always ensures that there is constant tension on the cable.

Slack in the cable could result in an increase in fall distance. Movenormally as sudden jerky movements will allow the

locking mechanism to engage.

Do not install in an area where a swing fall hazard potentially could exist. Failure to do so can result in injury or

possibly death.

Keep these instructions for reference.

WARNING:

If inspection reveals an unsafe or defective condition, remove the Self Retracting Lifeline from service and send it back to

SAFE KEEPER or an authorized repair center.

Training: It is the responsibility of the user and the purchaser of this equipment to assure that they are familiar with these instructions,

trained in the correct care and use of, and are aware of the operating characteristics, application limits, and the consequences of

improper use of this equipment.

WARNING:

Training should be conducted without exposing anyone to a fall hazard. Training should be repeated on a periodic basis in

accordance with your organization policy and compliance with OSHA regulations.

ONE OR MORE OF THESE LABELS WILL APPEAR ON YOUR PRODUCT

MADE IN INDIA