DAITEM 171-21X Installatiehandleiding - Pagina 7

Blader online of download pdf Installatiehandleiding voor {categorie_naam} DAITEM 171-21X. DAITEM 171-21X 8 pagina's. Infared motion detector
Ook voor DAITEM 171-21X: Installatiehandleiding (18 pagina's)

Pagina afdrukken

6. Maintenance

6.1 Battery low indication

The control panel indicates when the infrared detector's battery is low.

To check whether there is a problem with the detector battery, press on the detector's test button.

IMPORTANT: if the test LED indicator lamp no longer lights up, the lithium battery should be replaced.

6.2 Changing the battery

• The lithium battery pack must be replaced by the same type of pack with the same technical characteristics

(BATLi25, 2 x 3.6 V – 2 Ah).

• We advise you to use the DAITEM BatLi25 pack available in the catalogue in order to guarantee individual

safety and equipment reliability.

• Dispose of the waste lithium power pack in an appropriate recycling bin.

To change the battery:

1. Switch the control panel to installation mode and ask the user to press:

master code

The detector's conﬁguration is saved when the battery is changed.

2. Open the detector casing (see § on Opening).

3. Unclip the lithium battery pack.

4. Wait 2 min. before replacing the ﬂat lithium battery.

5. Close the detector.

6. Switch the control panel back to user mode. Press:

engineer installer code

7. Technical data

Speciﬁcations

Infrared detection

Fixing methods

Use

Power supply

Battery life

Average humidity rate

Radio links

Test button

LED indicator lamp

Operating temperature

Protection mechanism

Degrees of mechanical protection

Dimensions without swivel bracket

Weight

then

engineer installer code

"beep, date,

time, off"

Infrared motion detector

• 171-21X/175-21X: 12 m, 90°, motion detector

• 172-21X: 22 m, 12°, corridor detector

• 173-21X: 12 m, 8°, curtain detector

• on a swivel bracket

• ﬂat against the wall

• in a corner

inside

2 x 3.6 V - 2 Ah BatLi25 lithium battery

5 years in normal conditions of use

5% to 75% without condensation at 25°C

TwinBand

battery and detection

-10° C to +55° C

against opening and removal (unless swivel bracket mounted)

IP 31/ IK 04

58 x 102 x 57 mm

115 g (with battery, swivel bracket and base)

"beep, installation

mode"

IMPORTANT: Pull on the tab to remove the lithium battery.

400/800 MHz