DSC PowerSeries PC1832 Handmatig - Pagina 4
Blader online of download pdf Handmatig voor {categorie_naam} DSC PowerSeries PC1832. DSC PowerSeries PC1832 18 pagina's. System
enhancement
module
Ook voor DSC PowerSeries PC1832: Installatiehandleiding (17 pagina's), Installatiehandleiding (13 pagina's), Installatiehandleiding (20 pagina's)
DSC Power Series PC1616 PC1832 PC1864 System Manual
Delay.
Night Arming
To fully arm the system when it has been armed in Stay Mode, press [*][1] at any keypad. All interior
zones will now be armed except for devices programmed as Night Zones.
Night zones are only armed in Away mode. This permits limited movement within the premises when the
system is fully armed. Ensure that your installer has provided you with a list identifying zones
programmed as night zones.
When the interior zones have been activated (i.e., [*][1] you must enter your access code to disarm the
system to gain access to interior areas that have not been programmed as night zones.
Silent Exit Delay
If the system is armed using the Stay button (Programmable Function Key) or using the "No Entry" Arming
method ( [access code]), the audible progress annunciation (keypad buzzer) will be silenced and the exit
time will be doubled for that exit period only.
Remote Arming and Disarming
The system can be armed and/or disarmed using the remote control device (wireless key) model DSC
WS4939. When arming the system by using the Arm button on the wireless key, the system will
acknowledge the command by sounding a single bell squawk. When disarming using the Disarm button
on the wireless key, the system will acknowledge the command by sounding two bell squawks that can be
heard from the exterior of the premises.
Bypassing Zones
Use the zone bypassing feature when you need access to a protected area while the system is armed, or
when a zone is temporarily out of service, but you need to arm the system. Bypassed zones will not be
able to sound an alarm. Bypassing zones reduces the level of security. If you are bypassing a zone
because it is not working, call a service technician immediately so that the problem can be resolved and
your system returned to proper working order. Ensure that no zones are unintentionally bypassed when
arming your system.
Zones cannot be bypassed once the system is armed. Bypassed zones are automatically canceled each
time the system is disarmed and must be bypassed again, if required, before the next arming.
Note: For security reasons, your installer has programmed the system to prevent you from bypassing
certain zones (e.g., smoke detectors).
https://alpha.adt.com/help/61[11/12/2018 9:40:17 PM]