DSC PowerSeries SCW9047-433 Gebruikershandleiding - Pagina 12
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DSC PowerSeries SCW9047-433. DSC PowerSeries SCW9047-433 20 pagina's. Self contained wireless
Ook voor DSC PowerSeries SCW9047-433: Gebruikershandleiding (20 pagina's)
Pagina afdrukken
User Function Commands
First disarm the system then enter
The
command is used to gain access to the following list of Master functions of the system.
[1] Time and Date
Enter 4 digits for 24 Hour System Time (HH-MM). Valid entries are 00-23 for the hour and 00-59 for
minutes. Enter 6 digits for the Month, Day and Year (MM-DD-YY)
[2]-[3] Future Use
[4] System Test
The system's Bell Output (2s), Keypad Lights and Communicator are tested.
[5] Enable DLS / Allow Remote System Service
If enabled, the installer will be able to access Installer Programming remotely using DLS (Downloading
Software). This function provides a window for telephone ring detection by the alarm, system. The DLS
window will remain open for 6hrs, during which time the installer will be able to enter DLS an unlimited
number of times. After the 6-hr. window has expired, access to programming via DLS will be unavailable
until the window is re-opened.
[6] User Call-up
If enabled by the Installer, the panel will make 1 attempt to call the downloading computer. The
downloading computer must be waiting for the panel to call before downloading can be performed.
[7] For Future Use
[8] User Walk Test
Allows the user to enter the Walk Test mode. See Walk Test on page 11.
Changing Brightness/Contrast
When this option is selected, the keypad will allow you to scroll through 4 brightness levels and 10
contrast levels.
1. Press
[Master code].
2. Use the
3. Press
to select the setting you want to adjust.
4. a) 'Brightness Control': There are 4 backlighting levels. Use the
desired level.
b) 'Contrast Control': There are 10 different display contrast levels. Use the
scroll to the desired contrast level.
5. To exit, press
Changing the Buzzer Level
When this option is selected, the keypad will allow you to scroll through 21 different buzzer levels. A
level of 00 disables the buzzer.
1. Press
[Master Code].
2. Use the
3. There are 21 different levels, use the
Viewing the Event Buffer
The event buffer will show you a list of the last 128 events that have occurred on your system.
1. Press
[Master Code].
2. To select Event Buffer viewing, press
3. The keypad will display the event number and the time and date. Press
this information and the event details.
4. Use the
5. To exit event buffer viewing, press
keys to scroll to either Brightness Control or Contrast Control.
.
keys to scroll to Buzzer Control.
keys to scroll through the events in the buffer.
[Master Code]
keys to scroll to the desired level.
.
.
8
keys to scroll to the
keys to
to switch between