DSC tyco WP8360 Gebruikershandleiding

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DSC tyco WP8360. DSC tyco WP8360 19 pagina's.

Introduction to WP8360

The WP8360 is a wireless alarm system used to detect and alert the occurrence of a variety of

security and safety hazards, including burglary and fire. The WP8360 is governed by a control panel

that is designed to collect data from various sensors that are strategically located within and along

the perimeter of the protected site.

The alarm system can be armed or disarmed by a variety of key-fobs and keypads using special

codes. Proximity tags enable authorised people to enter restricted zones.

In the armed state, the system initiates an alarm upon detection of a disturbance in any one of the

armed zones.

In the disarmed state, the system provides visual information, and initiates an alarm if smoke is

detected or upon disturbance in a 24-hour zone.

The system identifies a wide range of events, including alarms, attempts to tamper with sensors,

and several types of trouble. Events can be reported automatically to monitoring stations, private

telephones, and mobile phones. Events can be reported by SMS and email. Your installer can

determine what type of events will be reported to which destination.

Note: A qualified technician must check the system at least once a year.

WP8060 features include the following:

Multiple arming modes

Away, Home, Away-Instant, Home-Instant, Latchkey, and Bypass

Disarm under duress

If a user is forcibly compelled to disarm the system, they can do so using a duress code that

disarms the system as usual, but also sends a silent alarm to the monitoring station.

System supervision

All wireless peripherals within the protected site send periodic keep alive supervision messages.

If a keep alive message is overdue, the system reports a missing trouble alert.

Battery supervision

The WP8360 continuously monitors the battery condition of the sensors and devices in the

system, and sends a low battery message whenever a battery needs to be replaced within a

maximum of 30 days.

Distress calls

Users can use key-fobs to activate distress calls by pressing two buttons simultaneously.

Access from remote telephones

You can access the WP8360 from a remote telephone and arm or disarm it, or receive status

information.

D-308258 WP8360 User Guide

Revision 0

WP8360 V20.2 User Guide

D-308258 (11/20)