DSC LC-171 Installatie-instructies en gebruikershandleiding - Pagina 11

Blader online of download pdf Installatie-instructies en gebruikershandleiding voor {categorie_naam} DSC LC-171. DSC LC-171 16 pagina's. Dual-tech motion sensor (dual pir & microwave) with pet immunity

Pagina afdrukken

To adjust for ranges between 3m and 18m (10 and 59 ft.) slide the detection element up or

down to correspond with the desired distance. Each step between 3m and 18m (10 and 59

ft.) represents 3m (10 ft) of range.

Maximum Range (18m, 59ft)

8.3 Sensitivity, Range and Pet immunity Adjustment

The calibration of range and sensitivity is performed by a single 16 position rotating switch.

There are 3 groups of switch settings grouped according to desired detection range.

Each group is divided into several levels of sensitivity according to the installation

environment.

The sensitivity is determined by a single 16 position rotating switch. Changing the

sensitivity affects immunity to environmental noises, and also affects the detection distance

and pet immunity level.

The rotating switch is marked with digits from "0" to "9" and following letters from "A" to "F".

Position "0" is maximum sensitivity and "F" is minimum sensitivity.

Note: Adjust sensitivity according to environmental conditions!

Group A - positions 0 – 5 – set sensitivity for 18m detection range with immunity to pets weight

up to 20kg

Group B - positions 6 – A – set sensitivity for 13m detection range with immunity to pets weight

up to 35kg

Group C - positions B – F – set sensitivity for 7m detection range with immunity to pets weight

up to 35kg

NOTE: Ensure that you select the group with a range corresponding to or slightly higher then

the range set in 8.2. Do not select a group setting that has a lower range then the range set in

8.2.

Minimum Range (3m, 10ft)