Foxfury Lighting Solutions EXOLANDER 700-XLS-IIE Producthandleiding - Pagina 7

Blader online of download pdf Producthandleiding voor {categorie_naam} Foxfury Lighting Solutions EXOLANDER 700-XLS-IIE. Foxfury Lighting Solutions EXOLANDER 700-XLS-IIE 15 pagina's.

Pagina afdrukken

Tighten each screw until the units are mated.

The EXOLANDER

To install the Landing Skid, align each Tab on Landing Skid with each

Slot on the EXOLANDER

on.

WARNING:

Manually test the EXOLANDER

sure nothing is loose. Note that a small amount of movement between the

structure and the UAV has been created, at the request of Autel, to eliminate

adding unnecessary forces to the vehicle's structure.

NOTE:

Do not pull/spread the Saddle during installation. The Saddle is intended to be

pushed into place.

NOTE:

Before our accessories are made available, they are tested internally

and verified externally by a minimum of 2 professional users. We have

experienced multiple cases of UAS (drone) mechanical modifications from

manufacturers within the same P/N and revision, and without providing

warnings or product updates. If there is a fit problem, please contact our

customer service department at

installation is now complete.

Landing Foot. Press and snap Landing Skid

Landing System by wiggling it and making

https://www.foxfury .com/contact/