Anslut 427-582 Gebruiksaanwijzing - Pagina 9
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Anslut 427-582. Anslut 427-582 10 pagina's.
Pagina afdrukken
1
SAFETY INSTRUCTIONS
• Do not look directly into the
work lamp when it is
switched on.
• Never point the beam at the
eyes of people or animals.
• Store out of the reach of
children.
• Can be used indoors and
outdoors, but do not
immerse in water or any
other liquid.
• Do not use the charger to
charge other products.
• Only use the supplied
charger to charge the lamp.
• Do not use the charger
outdoors. Do not expose the
charger to rain or moisture.
• All switches must be switched
off when charging, otherwise
the lamp can be damaged.
• Never cover the lens or
reflector when in use.
• Always unplug the power
cord and allow the lamp to
cool before cleaning, or
maintenance, to reduce the
risk of electric shock.
• Do not attempt to replace
the battery.
• The light source is not
replaceable
2
TECHNICAL DATA
Battery technique
Luminous flux
Protection rating
Battery capacity
Battery life
Charging time
Output
3
USE
3:1 CHARGING THE BATTERY
NOTE:
•
The battery must be fully charged before
using the lamp for the first time.
•
Charge as soon as the light gets weaker.
•
Do not allow the battery to remain
discharged for long periods.
•
Charge the battery immediately when it
becomes discharged.
•
To avoid the battery becoming completely
discharged, recharge it every three
months even when the lamp is not in use.
•
The lamp can be charged both via the
mains and a 12V outlet in a car.
1.
Make sure that all switches are
switched off.
2.
Connect the charger to the charger
outlet on the back of the lamp and the
other end to the power supply.
EN
Li-Ion
1200 lm
IP44
8000 mAh
3.5 h
6 h
20 W
9