Anslut 009370 Gebruiksaanwijzing - Pagina 14
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Anslut 009370. Anslut 009370 15 pagina's.
Pagina afdrukken
EN
SAFETY INSTRUCTIONS
•
Only intended to be used outdoors.
•
Do not look directly into the light beam
– risk of eye damage.
•
Always switch off the power supply before
installation, connection and service.
•
The product must be connected to an
earthed power supply on installation.
•
Do not cover the product.
•
The product can be mounted on a surface
of flammable material.
•
The recommended installation height is
max 3 metres above the ground.
•
Check that the mains voltage corresponds
to the rated voltage on the type plate.
Incorrect connection can result in electric
shock.
•
The electrical installation should be
carried out by an authorised electrician.
•
The product detects heat and movement
and goes on when someone comes within
the detection range. The product is not
guaranteed to maintain security or
prevent unauthorised entry.
•
Never modify the product, this could result
in serious personal injury and will
invalidate the warranty.
•
Do not use the product if the power cord
or plug are damaged.
•
The product must be discarded if the glass
front is cracked.
•
The LED light source is not replaceable.
When the light source has reached the
end of its useful life the complete product
must be replaced.
•
Do not touch the product, the power cord
or plug with wet hands.
ELECTRICAL SAFETY
New installations and extensions to existing
systems should always be carried out by an
authorised electrician. If you have the necessary
14
experience and knowledge (otherwise contact
an electrician), you can replace power switches
and wall sockets, fit plugs, extension cords and
light sockets. Incorrect installation can result in
fatal injury and the risk of fire.
SYMBOLS
Read the instructions.
Replace the glass front
immediately if it gets damaged.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage
Output
Luminous flux
Colour temperature
Protection rating
Detection range
INSTALLATION
IMPORTANT:
•
The spotlight is intended for permanent
installation outdoors. The installation
should be carried out by an authorised
electrician.
•
Use suitable fasteners for the actual wall
material. Check whether there are any
electrical wiring, gas pipes and/or water
pipes in the work area.
1.
Switch off the power supply.
FIG. 1
230 V ~ 50 Hz
18 W
1100 lm
4000 K
IP44
10 m/120°