DSC Escort5580 Voice Assisted Security Control Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DSC Escort5580 Voice Assisted Security Control. DSC Escort5580 Voice Assisted Security Control 17 pagina's. Voice assisted security control

Pagina afdrukken

DSC Escort5580 Voice Assisted Security Control Gebruikershandleiding

Trouble Conditions

The control panel continuously monitors a number of possible trouble conditions. If one or more of

these conditions occur, the regular keypad will beep twice every ten seconds. There is no indication

on a telephone until the system is accessed.

Viewing Troubles

To view the troubles present on the system, the following is a list of possible troubles and how they

would be enunciated. With the system disarmed, access the security system using the steps

described in the Accessing Your Security System sections of this manual.

Select a partition as explained in the accessing partitions section of this manual.

Press the [ ] key. You will hear the prompt.

Press the [2] key and the system will announce one or more of the following list of possible troubles

on the system. If there is no troubles present the system will announce

The following is a list of possible troubles and how they would be enunciated.

Message

"AC Power Trouble"

"Phone Line Trouble"

"Communications trouble"

"Communications trouble" Your system has been unsuccessful in communicating an event with

"Communications trouble"

" Zone Fault, Press [5]"

"Zone tamper, Press [6]"

"Zone tamper, Press [6]" Your system has detected a Zone Tamper on one or more zones.

"Zone tamper, Press [6]"

"Zone low Battery,

Press [7]"

"The time and date are

incorrect."

"Service is Required"

" For System Troubles, Press [2]"

" There are NO System troubles.

To exit press[#]"

Cause and What to Do

Electrical power to the system has been interrupted. Check your fuse

box or circuit breaker and ensure that the electrical circuit for the

system is on. If this does not correct the problem, call for service.

Your system has detected a problem with the telephone line. If this

problem does not correct itself, or happens frequently, call for service.

your monitoring station. If this message is heard, Call for service

immediately.

Your system has detected a Zone Fault on one or more zones. Press

[5] and the system will announce which zone(s) have a fault. If you are

unsure how to clear a zone fault, call for service.

Press [6] and the system will announce which zone(s) have tampers. If

you are unsure how to clear the zone tamper, call for service.

Your system has detected that one or more of the wireless zones on

the system has a LOW Battery. Press [7] and the system will announce

which Zone(s) have low batteries. Once you know which zones have

low batteries, Change the batteries. If this does not correct the

problem, call for service.

If all power to the system is interrupted (AC and Battery), the

system clock and date will need to be reset. Press [ ] [6], and the

system will announce messages to allow you to enter the time and

Date. If you are unsure as to the cause for the system power failure,

call for service.

If this message and no further trouble description is announced, call

for service.