Foxpro Firestorm Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Foxpro Firestorm. Foxpro Firestorm 20 pagina's. Digital game caller

1.0 QUICK OPERATING GUIDE

Since the FIRESTORM is shipped from the factory with no batteries installed;

the first step is to install 8 "AA" batteries. These may be alkaline or

rechargeable types. We strongly recommend high capacity NiMH rechargeable

batteries over alkaline types for maximum performance, particularly when using

loud volume levels.

1. To install batteries, remove the battery door. The battery door is

located on the side of the caller, and is held in place with a knurled

thumbscrew.

2. Orient the batteries as per the directions shown in each cavity within

the holder.

NOTE: The battery polarity alternates.

3. Replace the battery door after the batteries are installed.

1.2 Installing the TX9 Battery

The TX9 transmitter operates from a 9V battery. Please use a high quality

alkaline battery.

1. Remove the battery compartment cover located on the rear of the

transmitter.

2. Connect the 9V battery to the connector plug, and orient the battery in

the transmitter.

3. Replace the battery compartment cover.

1. Make sure that at least 1 of the speaker selector slide switches is set to

the right, or "ON" position.

2. Click the On/Off/Volume switch to the on position. Please note that this

switch is also the volume control when the unit is operated without the

remote control. The further clockwise you turn the knob, the louder the

unit will play. At this point, the LCD display on the FIRESTORM should

display two bars "- -".

Page | 5