AirTight SS-300-AT-C-55-E Snelstarthandleiding - Pagina 3

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} AirTight SS-300-AT-C-55-E. AirTight SS-300-AT-C-55-E 4 pagina's. Access point / sensor

Pagina afdrukken

Getting the SS-300-AT-C-55-E Online

Step 1:

Attach the antennas to the device

You must affix the external antennas to the device for proper functioning. The device

does not work without the external antennas.

Step 2:

Power up the device

If using PoE, plug one end of the Ethernet cable into the PoE switch or injector and plug

the other end into the Ethernet port on the SS-300-AT-C-55-E. Ensure that the PoE source

is turned ON.

As an alternative to PoE, insert the power adapter plug into an AC power outlet and the

other end into the power input port on the SS-300-AT-C-55-E.

Warning:

If you are using AC power to power up the device, ensure that you only use

the AC power adapter that is shipped as part of the SS-300-AT-C-55-E package.

Step 3:

Connect device to the network

If you are using PoE, then the SS-300-AT-C-55-E should already be connected to your

network. If you are not using PoE, then plug one end of the Ethernet cable into an Ethernet

jack on your network and the other end into the Ethernet port on the SS-300-AT-C-55-E.

Step 4:

Check the LED status

Wait for a few minutes till the

three LEDs for Wi-Fi, Ethernet, and

Power turn GREEN indicating that

the SS-300-AT-C-55-E is online

and operational.

Wi-Fi

Ethernet

Power