DSE DK-BL1-HDS Gebruikershandleiding
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DSE DK-BL1-HDS. DSE DK-BL1-HDS 2 pagina's. Camera with hidden video recorder & wifi dvr
Pagina afdrukken
USER'S MANUAL
DK-BL1-HDS
Camera with WiFi DVR
Product description
DK-BL1-HDS is a video recorder equipped with an
integrated camera to be hidden.
1 - Motorized lens
2.
SD card slot
3.
USB port
4.
Charging LED indicator
5.
Reset button
6.
Camera on / off switch
7.
WiFi status led
8.
Magnet for fixing
Black box camera
DK-BL1-HDS is an investigative camera with 180 °
rotating lens supplied in a neutral container. You can
arrange it together with other objects or hide it behind an
opening of a few centimeters
DK-BL1-HDS Camera with hidden video recorder
DSE srl - Digital Surveillance Equipment - www.dse.eu
Document: DK-BL1-HDS 2A1
Supply
The camera is able to operate with only the power supply
of its internal 950 mAh battery which allows about 3 hours
of autonomy. The battery is recharged by connecting the
USB power supply for a few hours.
The DVR can also operate on mains power with the
included 220V / USB power supply.
In this case, the USB cable is kept connected even during
operation. The LED (4) lights up red during charging.
Movie storage
The video files are stored on a micro SD card (not
supplied). The movies have Full HD 1920x1080 resolution
at 25 f / sec. And they are saved in MP4 format with H264
compression
It is possible to use micro SD cards of any brand up to
128 GB of capacity. Over 300 hours of recording can be
stored on a 128GB SD card.
Obviously
it
is
advisable
recording, where possible, in order to record only
meaningful images and not unnecessarily occupy memory
when no action takes place in front of the lens.
Once the memory has run out, the DVR will automatically
overwrite the oldest files if programmed in this way in the
configuration.
The duration of the individual files is also programmable in
the configuration.
Inserting the micro SD card
The first thing to do, if you want to make recordings, is to
insert the micro SD card into the slot in the DVR (2) which
can be accessed by removing the rear door.
It is possible to use micro SD cards with capacities up to
128 GB in CLASS 10 or higher.
A class 10 SD card has a write speed of 10 MB / s. Do not
use SD cards with lower speeds as they will lead to
malfunctions.
Pay attention to the direction of insertion of the SD card
which will slide into its seat only with the gold contacts
facing the USB socket.
No micro SD card is included in the package.
Charging the battery
Before using the device, it is advisable to fully charge the
battery. To do this, connect the USB port of the DVR to
the computer or USB charger with the supplied cable.
Full charging takes approximately 8 hours depending on
the initial charge state. It is recommended that you
comfortably let the charging complete overnight.
Next to the USB socket there is a red LED that turns on
during charging and turns off when charging is complete.
Turn on the device
DK-BL1-HDS is equipped with a power switch on the rear
(6). When turned on, the DVR does not emit any visible
signal except the blue LED (7) which signals the WiFi
status (flashing = factory access point mode, fixed =
connected to external WiFi network). This LED can later be
disabled via the app.
To use the product, you need to use a smartphone or
tablet with the HDSmartIPC app.
Download HDSmartIPC and configuration
DK-BL1-HDS
has
been
controlled via wifi with a mobile phone or tablet.
It is not necessary to have a wifi network to use DK-BL1-
HDS as the device is factory supplied in ACCCESS POINT
Page: 1
to
use
motion
detection
developed
to
be
remotely