DSE DK-MG1 Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DSE DK-MG1. DSE DK-MG1 2 pagina's. Camera with recorder mug for drinks

Pagina afdrukken
OWNER'S MANUAL
It lights the blue LED (standby) and then the red (rec) together to indicate that the device is
recording. To stop recording, you must hold the ON / REC (5/10 in the figure), the device after
stopping the recording will go out and save the file to the memory card inserted. The
intermittent flashing of the
presence of
an anomaly. To check
integration and smooth operation of the SD card.
vibration switch
If you move the switch to ON the vibration function is activated. The device will vibrate to alert the
recording starting and stopping.
HD / VGA Selector
With this selector will
image. The HD resolution of 1280x720 and VGA is 640x480. The recordings in HD resolution
occupy more space in memory. In HD resolution you can store up to 10 hours on a 32GB SD
card. In VGA resolution on the same SD card you store up to 16 hours of recording.
Viewing files on PC
To manage the files recorded with computers you can connect the device to your PC with the
USB cable. E 'can connect the DK-MG1 to your computer or just remove the micro SD card and
insert it into an SD card reader. Once connected to the PC press the Room button ignition, the
device will be present in the computer's resources such as removable disk drive (mass storage)
and behaves like a common USB stick. The video files are saved in MOV format. Once copied or
moved
play them with any media player like VLC Videolan or Windows Media Player.
Setting Date and Time
The DK-MG1 sovraimprime date and time on the recordings. To update the date and time, if they
are not correct, you have to create a text file with the Windows Notepad named settime.txt
are not correct, you have to create a text file with the Windows Notepad named settime.txt
In this file you have to write the current date and time in the following format:
04.17.2014 10:28:00
(First 4 digits = year = 2 digit month, 2-digit day = space = 2 digit hour, 2 digits = minutes, 2
= second digit).
The example set April 17 2014 hours 10:28.
The file must be saved and copied to the root folder of the memory of DK-MG1.
Remove the DK-MG1 from the USB port and turn it on to store the new time.
FORMAT button
The DK-MG1 has the ability to format the memory card inserted. To do this, press and hold the
FORMAT buttons and ON / REC together for a few seconds. BLUE LED lights up, do not let the
buttons until the red LED will not blink then leave.
DK-MG1 camera with recorder mug for drinks
red LED indicates the
correct
the
tax
the resolution
the PC file you can
DSE srl - Digital Surveillance Equipment - www.dse.eu
The device memory is now completely empty.
RESET hole
If due to incorrect or inconsistent commands, the device should cease to respond to commands it
is possible to perform a RESET by inserting a pointed object into the reset hole. Hold for a few
seconds to restore the factory settings.
Main features
Sensor
Resolution
Frame Rate
video Format
overlay
Time
maximum
continuous recording
Temperature
operation
Notifications
operating temperature
operating temperature
-10 ° to + 60 ° C
-10 ° to + 60 ° C
Memory
Memory Capacity
Supply
USB Interface
Operating system
Consumption
Weight
dimensions
Document: DK-MG1 1D4
Document: DK-MG1 1D4
Document: DK-MG1 1D4
Page: 2
Page: 2
5 megapixel CMOS
VGA 640X480 HD
1280X720
30f / sec
MOV
Date hour
of
3 hours in VGA resolution two hours in
HD resolution
of
- 10 ° + 60 °
2 LED
MicroSD
Maximum 32GB
5V DC power supply
USB 2.0 Mini
All
190 mA - 390 mA
276g
66x165 mm