DSE DSE704 Bedieningshandleiding - Pagina 13

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} DSE DSE704. DSE DSE704 15 pagina's. Autostart control module

5 SPECIFICATION

Cranking Dropouts:

Alternator Input Range:

Mains Input Voltage

Alternator Input Frequency:

Mains Frequency

Auxiliary Outputs:

Operating Temperature Range:

Applicable Standards

Deep Sea Electronics plc reserve the right to change specification without notice.

057-042 704 Operating Instructions Issue 2.1 18/06/2007 11:27:00 JR

DC Supply:

8 Volts to 35 Volts DC Continuous.

Able to survive 0 Volts for 50 mS, providing supply was at

least 10 V before dropout and supply recovers to 5 Volts.

This is achieved without the need for internal batteries.

Max. Current:

Operating 50mA

Standby 10mA

75 Volts (ph-N) to 277 Volts (ph-N) AC (+20%)

15 – 277 Volts (ph-N) AC (+20%)

50 - 60 Hz at rated engine speed

(Minimum: 75V AC Ph-N)

(Crank Disconnect from 15V Ph-N @ 20Hz)

Overspeed +14% (+24% overshoot)

Underspeed –20%

50 – 60 Hz

Start Output:

1.2 Amp DC at supply voltage.

Fuel Output:

1.2 Amp DC at supply voltage.

Dimensions:

125mm x 165mm x 28 mm

Charge Fail:

12 Volts = 8 Volts CF 24 Volts = 16 Volts CF

-30°C to + 70

Compliant with BS EN 60950 Low Voltage Directive

Compliant with BS EN 50081-2: 1992 EMC Directive

Compliant with BS EN 61000-6-4: 2000 EMC Directive

Compliance to European Legislation

Registered Component for USA & Canada

- 13 -