DSG Technology Blaze Series Snelle installatiehandleiding - Pagina 7
Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} DSG Technology Blaze Series. DSG Technology Blaze Series 20 pagina's.
Pagina afdrukken11. Pickup After Rings: Input the number of the ring count allowing the system to answer calls.
12. Flash Timing: The Flash function was set on the MENU button of the IP phones. Set the Flash Timing
allowing IP phones to use functions provided by Centrex.
13. Voice Quality: Adjust the parameters below to fine tune the voice input and output quality.
Transmit Gain: this field edits the TX Gain of the CO Line ports, or how loud the external party
hears your voice.
Receive Gain: this field edits the RX Gain of the CO Line ports, or the volume of incoming calls.
DTMF Volume: this field edits the intensity of the DTMF tones in the CO Line ports.
14. Apply Settings: After finalizing the settings in this port, if you want them to be identical as this one,
you may apply the settings to other CO Line ports present in the system, saving you the hassles of
configuring each port individually.
Configure SLT Ports
1. Go to Main Menu>Gateway Configuration>Analog Gateways.
2. From "Analog Gateway List", select the gateway you would like to edit and click Port Setting.
3. Select a SLT port from the "Port List" and click the Port Parameters button to configure the settings for
this port.
4. Analog Port Flash Time: You may set the Flash Timing of the SLT ports to check whether the Hook
action (quick press and release of the phone's hook) on the analog phones works properly.
5. Caller ID: The SLT ports have the ability to detect either DTMF or FSK Caller ID modes. Note that
your local telephone company must provide Caller ID service in order to display the incoming party's
number.
6. Fax: T.38 is a fax relay protocol. It allows fax to be transported across IP networks between fax
machines. When selected, please be sure the T.38 is also enabled at the CO line port setting.
7. Voice Quality: Adjust the parameters below to fine tune the voice input and output quality.
Transmit Gain: this field edits the TX Gain of the CO Line ports, or how loud the external party
hears your voice.
7