DSI LIGHTING DS18114 Gebruiks- en onderhoudshandleiding - Pagina 6
Blader online of download pdf Gebruiks- en onderhoudshandleiding voor {categorie_naam} DSI LIGHTING DS18114. DSI LIGHTING DS18114 18 pagina's. 1-light wall sconce
Pagina afdrukken
Installation (continued)
4
Assembling the fixture body to the
outlet box
□
Place the fixture body (A) over the outlet box, and ensure the
heads of the support screws (long) (CC) come through the
holes of the canopy of the fixture body (A).
□
Tighten the cap nuts (GG) onto the protruding support screws
(long) (CC) on the mounting bracket (AA) until the canopy
assembly (A) is held firmly against the wall.
CC
AA
GG
6
Installing the light bulbs
□
Install the light bulb (not included) into the socket. Use one 60-watt
medium base (E26) type "ST64" bulb (recommended).
NOTE: You can also use one 60-watt maximum medium
base (E26) type "A" bulbs or 9W maximum medium base (E26)
LED vintage Edison bulb (sold separately). Do not exceed the
recommended wattage.
5
Installing the glass shades
□
Place the glass shade (D) over the socket, align the holes of the
glass shade (D) with the holes of the cap of the fixture body (A),
then secure the glass shade with the rubber washers (B) and
the thumbscrews (C) as shown on the diagram.
A
6
A
B
C
D
A