ADDAC System ADDAC222 Gebruikershandleiding - Pagina 4
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ADDAC System ADDAC222. ADDAC System ADDAC222 6 pagina's. 1v/oct to midi notes
Pagina afdrukkenADDAC222 User's Guide
OPERATION MODES
There are 3 Operation Modes: Continuous, Triggered and Gated.
MODE 1 - Continuous:
In this Mode a new note will be generated every time a CV change is detected at the 1v/oct CV input.
The [NOTE1 OFF] push buttons and trigger inputs will cancel the oldest active note.
The [ALL NOTES OFF / NOTE ONs] trigger inputs will cancel every note active at once.
MODE 2 - Triggered
In this Mode a new note will be generated every time a Trigger is detected at the [ALL NOTES OFF /
NOTE ONs] inputs.
The [NOTE1 OFF] push buttons and Trigger inputs will cancel the oldest active note.
MODE 3 - Gated
In this Mode a new note will be generated every time a Gate is detected at the [ALL NOTES OFF / NOTE
ONs] inputs. This note will be sustained until the input Gate goes Off, then the note will be canceled.
The [NOTE1 OFF] push buttons and Gate inputs will Sustain notes until the Gate is Off, overriding the
canceling of notes coming from the [ALL NOTES OFF / NOTE ONs] Gate Offs.
MODES MENU
First make sure no inputs are connected to the NOTE OFF 1 to 4 jacks.
To enter the Mode Menu press and hold all four NOTE1 OFF buttons for 3 seconds.
The button lights will change and show the menu state:
MODE 1 = Button led is off
MODE 2 = Button led is on
MODE 3 = Button led is flashing
Press the desired button channel to advance to the desired Mode.
The Menu will exit itself when no button is pressed for 5 seconds.
The settings are saved once it exits the menu and will be stored to be recalled the next session even
after powering down.
ADDAC SYSTEM
page 4