Attainment Company Big Button with Steps and Levels Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Attainment Company Big Button with Steps and Levels. Attainment Company Big Button with Steps and Levels 2 pagina's.

Pagina afdrukken

The Big Button with Steps and

Levels is a powerful voice output tool with a single large

Play button. A removable transparent cap snaps onto the Play button and has an opening on top for

sliding in overlays or icons. Remove the cap by firmly pulling up on the lip until it dislodges. Then pull

on the top of the cap to remove it. The cap extends nearly to the table surface,

creating a large activation area with an extremely

low profile. In fact, you can play a message

Low-profile,

without lifting your hand off the table. Only a

easy-touch

little pressure is needed to activate speech.

activation!

Volume

Volume up and down buttons are on the

front right side. The Big Button beeps

when you adjust the volume up or down.

Levels and Steps

Operations

Removable,

transparent cap for

Choose from two operational styles—Levels or

easy cleaning

Steps—with the toggle switch on the back. The Steps

and Levels LED shows through the transparent cap.

In Levels operation, the same message plays each

time the Play button is pressed. Select a level with the

1,2,3 button on the back.

Large,

In Steps operation, a different step of the activity

easy-touch

sequence plays each time the Play button is pressed.

Play button

The device has a ten-step capacity for each of three

activities. Press and hold the Play button continuously

for 5 seconds to reset the device to Step 1.

Levels Operation

1. O n the back of the device, move the Step/Level switch to Level.

2. P ress and release the REC (Record) button. A solid red LED on the front indicates your

Big Button is ready to record.

3. P ress the Volume up button

show 1–9 and then L in sequence. The L stands for last.

4. P ress and release the Play button and the red LED will flash. You are now recording.

Speak clearly, about 8" from the Big Button. Note: The click you hear when you press the

Switch accessible!

The switch jack is located

Play button will not record.

on the Button's right edge.

When connected, your switch

5. Press and release the Play button when you are done recording. Otherwise, recording will

performs the same functions

automatically stop after 8 seconds. The LED will return to solid red.

as the Play button.

6. Press and release the Volume down button

hear your recording. To re-record, follow recording

directions 3–5.

7. To exit Record mode, press and release the REC

button. The red LED will turn off.

Note: You can erase or re-record any level message

without affecting other messages.

Playing

Press and release the Play button. The Record/Play

LED will flash green during playback. Press and

release the Play button during playback to stop

the message. Only one message will play until you

change levels via the 1,2,3 button.

Recording

to locate the level you want to record. The Level LED will

BACK VIEW

Switch➤

Keyhole

jack

On/Off➤

switch

Record➤

button

1,2,3➤

button

Step/Level➤

toggle➤switch

Steps Operation

Recording

1. Move the Step/Level switch to Step.

2. Press and release the 1,2,3 button to select one of the three activities (A,B,C). You can record up to ten steps for

each activity.

3. Press and release the REC button. A solid red LED will turn on, and "1" is shown in the Steps LED. You are now

ready to record Step 1.

4. Press and release the Play button and the red LED will flash. You are now recording Step 1. Speak clearly, about

8" from the Big Button. Note: The click you hear when you press the play button will not record.

5. P ress and release the Play button when you are done recording. Otherwise, recording will automatically stop after

8 seconds. The LED will turn to solid red and the Step LED will advance to 2.

6. P ress and release the Volume down button

to hear what you have just recorded. To re-record Step 1, cycle

through the steps by pressing the Volume up button. Stop on "1" and record.

7. Follow recording directions 4–5 to record additional steps.

Overlay➤storage➤

8. T o exit Record mode, press and release the REC button. The red LED will turn off.

compartment

Note: You can erase or re-record any step without affecting other messages.

Rubber➤

feet

Locate the desired activity sequence (A,B,C) via the 1,2,3 button. To play the first step,

Threaded➤

press and release the Play button. The Record/Play LED will flash yellow. If the step is

insert

played to completion, you automatically advance to the next step. To hear the previous

step again, press and release the Volume down button

playback of a step, press and release the Play button. You do not advance to the next

step if playback is interrupted. The Steps LED will display an L with a corresponding

Battery➤

beep to indicate you are at the end of an activity sequence. Press and hold the Play

compartment➤ ➤

(2➤AAA➤batteries➤

button continuously for 5 seconds to return to Step 1.

included)

Press and hold the Play button

continuously for 5 seconds to

reset the Steps operation.

Playing

immediately. To stop the