3One data IRT5300-AW-5T2D Snelle installatiehandleiding - Pagina 3
Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} 3One data IRT5300-AW-5T2D. 3One data IRT5300-AW-5T2D 4 pagina's. Industrial 4g router
LED
Status
Description
Two indicators are on. It means
the LTE signal of the opposite
end is normal
All indicators are on. It means
the LTE signal of the opposite
end is strong
Device is powered on or running
ON
abnormally
RUN
Device is powered off or running
OFF
abnormally
Blinking
Device is running normally
ON
Power supply, port link has alarm
ALM
Power supply, port link has no
OFF
alarm
Power supply is connected and
ON
running normally
P(1-2)
Power supply is disconnected
OFF
and running abnormally.
ON
With SIM card
SIM(1-2)
OFF
Without SIM card
GPS
Reserved
Reserved
LTE
module
Blinking
LTE
normally
OFF
LTE module isn't operating
POE power supply is operating
ON
normally
PoE
POE power supply is operating
OFF
abnormally
Copper port has established an
ON
active network connection
Copper port is in an active
Link(1-5)
Blinking
network state
Copper port hasn't established
OFF
an active network connection
Serial port has established an
ON
COM(1-2)
active network connection
Blinking
Serial port is in an active network
LED
Status
OFF
ON
RLY
Blinking
OFF
ON
DI
Blinking
OFF
【Specification】
Standard
Standard
is
operating
Protocol
Panel
Copper port
Serial port
I/O port
SIM slot
Description
state
Serial port hasn't established an
active network connection
The output end of DO has
connected to external device
The
output
end
of
DO
is
communicating
with
external
device
The output end of DO hasn't
connected to external device
The
input
end
of
DI
has
connected to external device
The
input
end
of
DI
is
communicating
with
external
device
The input end of DI hasn't
connected to external device
IEEE802.3, IEEE802.3u,
IEEE802.11b/g/n, IEEE802.11i,
IEEE802.11r, IEEE802.3af/at
IP, Ping, Traceroute, DHCP
Server/Relay/Client, DNS Relay,
Dynamic DNS, Telnet, SSH, HTTP,
HTTPS, TFTP, FTP VLAN
IP route, static route, RIP, OSPF
5 10/100Base-T(X) RJ45 ports, which
could be configured to 5 LAN or 4
LAN+1 WAN. The copper port 5
supports POE48VDC power supply
input.
2 RS-232 or 2 RS-485 serial port
Reserved
2
SIM
slots,
redundancy
backup,
support 1.8V/3V SIM card
2 LTE antenna interfaces, RP-SMA
female
Master
antenna
sending/receiving information
Antenna
interface
Slave
antenna
receiving information
2
WIFI
antenna
female
Indicator
WLAN indicator, LTE signal strength
indicator,
running
indicator, power supply indicator, SIM
indicator, LTE indicator, PoE indicator,
copper port connection indicator, serial
port connection indicator, RLY indicator,
DI indicator
WIFI
Transmission
Rate
802.11n
6.5~300Mbps
802.11b
11/5.5/2/1Mbps
802.11g
54/48/36/24/18/12/9/6Mbps
WIFI RF
Channel
2.412GHz~2.4835GHz
RF
power
23dBm
output
Modulation
DBPSK, DQPSK, CCK, OFDM,
scheme
16-QAM, 64-QAM
WIFI Receiving
Sensitivity
802.11n_HT40
-82dBm@MCS0, -64dBm@MCS7
802.11n_HT20
-85dBm@MCS0, -67dBm@MCS7
802.11g
-91dBm@6Mbps, -72dBm@54Mbps
802.11b
-93dBm@1Mbps, -87dBm@11Mbps
WIFI
Transmission
Power
802.11n_HT40
23dBm@MCS0, 20dBm@MCS7
is
used
for
is
used
for
interfaces,
SMA
indicator,
alarm