Attero Tech unDIO2x2 Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Attero Tech unDIO2x2. Attero Tech unDIO2x2 16 pagina's. 2-in/2-out dante interface
Ook voor Attero Tech unDIO2x2: Gebruikershandleiding (17 pagina's)

Pagina afdrukken
4 – ARCHITECTS & ENGINEERS SPECIFICATION
The Dante Break Out interface shall have two balanced mic/line analog inputs and two balanced line analog outputs.
Each analog input shall be capable of driving a Dante audio flow, and each analog output shall be capable of being
driven from a Dante audio flow.
Each input shall have +24V phantom power, selectable via software on a per channel basis. Each input channel shall
have three gain levels: 0dB, +25dB and +40dB, selectable via software on a per channel basis.
Each output channel shall have two gain levels: 0dB and +10dB, selectable via software on a per channel basis.
All parameter changes saved to the default preset will be non-volatile and self restoring in the event of an AC or PoE
power interruption.
The unit shall accept either +12V DC or IEEE802.3af standard PoE as power input. The unit shall be compliant with FCC
Part15, CE and RoHS requirements.
The unit shall be the Attero Tech unDIO2x2 I/O interface.
4.1 – Device Specifications
Audio Inputs:
Input Type:
Gain:
Input Impedance:
Maximum Input
Levels:
Phantom Power:
Audio Outputs:
Output Type:
Output Gain
Maximum output
level:
Audio Performance:
Noise:
System THD:
Attero Tech LLC 2013
Balanced and RF filtered 3-
pin depluggable
0dB, +25dB, +40dB,
software selectable
>1.8K ohms at any gain
setting
+8dBu @ 0dB gain
-16dBu @ +25dB gain
-21dBu @ +40dB gain
+24V, software selectable
Balanced line level with
automatic muting on loss
of Dante signal
0dB, +10dB, software
selectable
+12dBu
<-90dBu @ 0dB gain
<0.01% at any gain, input
signal 3dB below
maximum
Dante Network:
Physical Level:
Connector:
Cable Quality:
Transmission Speed:
Power Requirements
Power Consumption
Dimensions
Operating
Temperature:
Compliance
Page 13
unDIO2x2
User Manual
Standard Ethernet
Single RJ-45
CAT-5
100Mbps
+12V DC or
IEEE802.3af PoE
Less than 3W
1.06"H x 6,45"W x
3.45"D
0
C – 40
C
O
O
FCC Part 15 Class A
Compliant, CE, RoHS
614-00013-01