Attero Tech unDIO2x2 Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Attero Tech unDIO2x2. Attero Tech unDIO2x2 17 pagina's. 2-in/2-out dante interface
Ook voor Attero Tech unDIO2x2: Gebruikershandleiding (16 pagina's)

Pagina afdrukken
1 – Overview
The unDIO2x2 is a 2-in/2-out audio interface utilizing Audinate's Dante protocol. It's ideal for adding 2 channels of
Dante audio I/O in a small, unobtrusive form factor. The two inputs use 3-pin depluggable connectors for balanced or
unbalanced I/O connectivity and support either mic or line level signals. Each input also features a 24V phantom power
option. The two outputs also use 3-pin depluggable connectors and each provides a balanced line level output. Each
output also has an optional +10dB analog boost.
Connection to the Dante network is provided by a single Ethernet RJ45 connector on the back of the unit.
The unDIO2x2 can be powered by a 12V DC wall wart (ordered separately) but it also supports the use of PoE instead.
This allows the unDIO2x2 to be powered over the network cable from a suitable PoE source (IEEE802.3af). The PoE
power option is particularly useful if the unDIO2x2 is mounted in a remote location where access to a mains outlet is
limited or indeed, non existent.
The unit comes in a small form factor with integrated mounting bracket allowing it to be mounted discretely in small
spaces (such as under desks) close to the sources or sinks thus reducing the amount of analog cabling that may be
required.
Audinate's Dante Controller or other 3rd party manufacturer's Dante routing software can be used to control the audio
routing configuration of the device while the Attero Tech unIFY Control Panel application can be used to configure the
device-specific features.
The unDIO2x2 also supports control by third party systems allowing external configuration of its settings such as
phantom power and input gain in real time. Further information on 3
document in section 4.
1.1 – What's in the Box
The unDIO2x2 comes supplied with the following
unDIO2x2 device
o
1.2 – Optional Extras
All of the following are available as options for the unDIO2x2 that may be ordered separately:
A 12 V DC power supply is available if PoE power is not required or available
o
© Attero Tech LLC 2014
Figure 1 - unDIO2x2 front and back
Page 4
User Manual
party control can be found later in this
rd
unDIO2x2
614-00013-05