Attero Tech unDIO2X2Plus Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Attero Tech unDIO2X2Plus. Attero Tech unDIO2X2Plus 15 pagina's. 2x2 dante interface

Pagina afdrukken
2 – Device Installation
1
Status LEDs
2
Recessed Factory Reset switch
3
Power Socket – Use with optional 12 V DC wall wart only
4
Dante® Ethernet interface connector and indicators
5
2 x Balanced line audio inputs
6
2 x Balanced line audio outputs
*Note: The unDIO2x2+ has a label on one of the mounting flanges that shows the MAC address. This is important for
initial device identification as the last 6 digits make up part of the devices default network name that is shown when the
device is detected by Dante Controller. The full MAC address is also given on the bottom of the unit.
 Attero Tech LLC 2018
Page 5
614-00037 Rev 01_b