Attero Tech unD3IO Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Attero Tech unD3IO. Attero Tech unD3IO 17 pagina's. 2-in/2-out dante wallplate with multi-io analog connectivity

Pagina afdrukken
5 – ARCHITECTS & ENGINEERS SPECIFICATION
The Dante interface unit shall provide one mic/line analog input on the front panel with a female XLR connector.
Selectable gains of 0dB, +25dB, and +40dB, and +48V phantom power option shall be provided via software for the XLR
input. The unit shall provide one line level balanced output with a male XLR connector. The unit will provide two RCA
line level inputs and one 3.5mm TRS line level input, both internally summed to mono. The unit will provide a 3.5mm
TRS line level output. The internal analog to digital signal conversion shall be performed at 24-bit resolution with a
sampling frequency of 48kHz. The Dante interface unit shall receive power over the Ethernet cable from an 802.3af PoE
compliant network switch. The Dante interface shall be wall mounted in a standard US dual gang junction box.
The Dante interface shall be compatible with Attero Tech Unify software for flexible control and monitoring in system
applications.
The Dante interface shall be compliant with the RoHS directive. The Dante interface unit shall be
compliant with the EMI/EMC requirements for FCC and CE.
The Dante interface shall be the Attero Tech unD3IO.
5.1 – Device Specifications
Audio Inputs (XLR):
Input Type:
Gain:
Maximum Input
Levels:
Phantom Power:
Input Impedance:
Audio Inputs (RCA, Jack):
Input Type:
Audio Outputs (XLR):
Output Type (XLR):
Output Gain
Maximum output
level:
Audio Outputs (Jack):
Output Type (Jack):
Maximum output
level:
 Attero Tech LLC 2018
Balanced and RF filtered 3-
pin depluggable
0dB, +25dB, +40dB,
software selectable
+12dBu @ 0dB gain
-13dBu @ +25dB gain
-28dBu @ +40dB gain
+48V, software selectable
>1.8K ohms at any gain
setting
Unbalanced RF filtered line
level stereo, each summed
to mono
Balanced line level with
automatic muting on loss
of Dante signal
0dB
+12dBu
Unbalanced line level with
automatic muting on loss
of Dante signal
+12dBu
Audio Performance:
Frequency Response:
EIN
Noise:
System THD:
Dante Network:
Physical Level:
Connector:
Cable Quality:
Transmission Speed:
Power Requirements
Power Consumption
Dimensions
Operating
Temperature:
Compliance
Page 14
unD3IO
User Manual
+/- 1dB, 20Hz – 20kHz
-115dBu (+40dB gain)
<-90dBu @ 0dB gain
<0.01% at any gain, input
signal 3dB below maximum
Standard Ethernet
Single RJ-45
CAT-5
100Mbps
IEEE802.3af PoE
Less than 3W
2.75"H x 3.60"W x 1.88"D
0
C – 40
C
O
O
FCC CFR 47 Parts 15B
ICES-003
CE (EN55022)
RoHS
614-00017 Rev 05_a