DT Research 340Q Basishandleiding - Pagina 3

Blader online of download pdf Basishandleiding voor {categorie_naam} DT Research 340Q. DT Research 340Q 5 pagina's. Rugged tablet

Pagina afdrukken

BASIC FEATURES

The 340Q rugged tablet integrates a bright display, USB ports, and embedded

networking elements such as wireless LAN and Bluetooth or optional 4G.

A 340Q typically integrates an wireless LAN (WLAN) adapter that may connect to

other wireless devices or access points.

OPERATION

Powering ON and OFF

To activate the 340Q, push and quickly release the Power Button. The display will come

on in a few seconds. To put the 340Q in Standby mode, push and quickly release the

Power Button. To turn the 340Q off for extended storage, power off safely using any

software function that "shuts down computer" provided in the software operating

system.

NOTE:

The battery packs shipped with your tablet may be low in power—please use

the AC-DC adapter with the 340Q when setting up for the first time to fully

charge the battery pack, or use the optional battery charger kit.

NOTE:

When the battery packs are charging, the blue-colored Battery LED should blink

slowly. If plugging in the AC-DC adapter does not trigger this blinking activity

and the LED stays dark, the battery pack(s) may have been drained substantially.

Try unplugging/ replugging the AC-DC adapter to the 340Q a few times to

activate the charging process.

NOTE:

Pushing briefly on the same button will wake up the system within seconds.

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate

interface will be displayed after a launch sequence of several seconds. The wireless

LAN connection may take 10-15 seconds to be established.

Conﬁguring the Mobile Tablet

The 340Q may be configured using the utilities and methods dictated by the software

operating system. The 340Q should be configurable for various properties such as

user profiles, network features, and several system elements.

Wireless Networking

Wireless LAN

The 340Q is often delivered with an embedded (user-inaccessible) WLAN adapter

equipped with a hidden custom antenna.

•

Through the support of typical WLAN adapters, the 340Q should be able to

detect all access points in the vicinity for you to select the access point of your

choice for connection.

•

The SSID and WEP/WPA/WPA2 (if enabled) parameters on the 340Q and the

access points have to match. The SSID is case-sensitive and it is recommended

that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for

secure access.

•

When WEP/WPA/WPA2 is enabled, you may need to consult your network

administrator or your networking equipment literature to properly configure

associated settings such as Authentication mode, etc.

•

Refer to the access point operating manuals for setting up the access points.

Bluetooth

The Bluetooth configuration application is enabled from the Windows System Tray

or from the Android Settings APP. Follow the instructions and options provided

within the application to configure and invoke Bluetooth connectivity with the

corresponding peripherals.