DT Research DT311YR Basishandleiding - Pagina 3

Blader online of download pdf Basishandleiding voor {categorie_naam} DT Research DT311YR. DT Research DT311YR 4 pagina's.

Pagina afdrukken

OPERATION

Powering ON and OFF

To activate the DT311YR, push and quickly release the Power Button. The display will

come on in a few seconds. To put the DT311YR in Standby mode, push and quickly

release the Power Button. To turn the DT311YR off for extended storage, power

off safely using any software function that "shuts down computer" provided in the

software operating system.

NOTE:

The battery pack shipped with your tablet may be low in power—please use

the AC-DC adapter with the DT311YR when setting up for the first time to fully

charge the battery pack, or use the optional battery charger kit.

NOTE:

When the battery pack is charging, the blue-colored Battery LED should blink

slowly. If plugging in the AC-DC adapter does not trigger this blinking activity

and the LED stays dark, the battery pack(s) may have been drained substantially.

Try unplugging/ replugging the AC-DC adapter to the DT311YR a few times to

activate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Button to put the

tablet in "Standby" mode while not in use. Pushing briefly on the same button

will wake up the system within seconds.

NOTE:

For DT311YR, avoid using the Power Button ("hold 4+ seconds" feature) to turn

off the tablet—this form of hardware shutdown is intended to be a means of

recovery from lockups, and not as normal operation.

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate

interface will be displayed after a launch sequence of several seconds. The wireless

LAN connection may take 10-15 seconds to be established.

Conﬁguring the Mobile Tablet

The DT311YR may be configured using the utilities and methods dictated by

the software operating system. The DT311YR should be configurable for various

properties such as user profiles, network features, and several system elements.

Wireless Networking

Wireless LAN

The DT311YR is often delivered with an embedded (user-inaccessible) 802.11ac

WLAN adapter equipped with a hidden custom antenna.

•

Through the support of typical WLAN adapters, the DT311YR should be able to

detect all 802.11 access points in the vicinity for you to select the access point of

your choice for connection.

•

The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT311YR and the

access points have to match. The SSID is case-sensitive and it is recommended

that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for

secure access.

•

When WEP/WPA/WPA2 is enabled, you may need to consult your network

administrator or your networking equipment literature to properly configure

associated settings such as Authentication mode, etc.

•

Refer to the access point operating manuals for setting up the 802.11 access

points.

USING THE TABLET

To Hold the Tablet

Left hand: grip the left back side of the tablet with your

left hand four index fingers, with thumb resting on the

top of the back side of the tablet and palm securely

against the back.

Right hand: grip the right back side of the tablet with

your right hand four index fingers, with thumb resting

on the top of the back side of the tablet and palm

securely against the back.

Peripherals Support

Through its USB ports, the DT311YR supports a wide range of USB-based peripherals.

These peripherals are applicable for software installation, applications storage, data

storage, and system software recovery and updates.

If the DT311YR comes with a Mobile broadband module, please contact your product

and/or service provider for the SIM Card installation procedures.