DT Research DT313H Basishandleiding - Pagina 3

Blader online of download pdf Basishandleiding voor {categorie_naam} DT Research DT313H. DT Research DT313H 4 pagina's. Mobile tablet
Ook voor DT Research DT313H: Basishandleiding (2 pagina's), Basishandleiding (4 pagina's)

Pagina afdrukken

DT313H/ DT313H-MD

OPERATION

Internal Battery

Warning!

The Internal battery pack should only be replaced by an authorized DT Research service

representative. Please contact your product and/or service provider for internal battery

replacement service.

Powering ON and OFF

To activate the DT313H/ DT313H-MD, push and quickly release the Power Button. The

display will come on in a few seconds. To put the DT313H/ DT313H-MD in Standby

mode, push and quickly release the Power Button. To turn the DT313H/ DT313H-MD

oﬀ for extended storage, power oﬀ safely using any software function that "shuts down

computer" provided in the software operating system.

NOTE:

The battery packs shipped with your tablet may be low in power—please use

the AC-DC adapter with the DT313H/ DT313H-MD when setting up for the ﬁrst

time to fully charge the internal battery pack. You may charge the external

battery pack with it attached to the DT313H/ DT313H-MD, or with the optional

external battery charger kit.

NOTE:

When the battery pack(s) is (are) charging, the blue-colored Battery LED should

blink slowly. If plugging in the AC-DC adapter does not trigger this blinking

activity and the LED stays dark, the battery pack(s) may have been drained

substantially. Try unplugging/ replugging the AC-DC adapter to the DT313H/

DT313H-MD a few times to activate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Button to put the

tablet in "Standby" mode while not in use. Pushing brieﬂy on the same button

will wake up the system within seconds.

NOTE:

Avoid using the Power Button ("hold 4+ seconds" feature) to turn oﬀ the

tablet—this form of hardware shutdown is intended to be a means of recovery

from lockups, and not as normal operation.

ENGLISH

Start Up

If the power up (from Standby or otherwise) is successful, the appropriate interface will

be displayed after a launch sequence of several seconds. The wireless LAN connection

may take 10-15 seconds to be established.

Conﬁguring the Mobile Tablet

The DT313H/ DT313H-MD may be conﬁgured using the utilities and methods dictated

by the software operating system. The DT313H/ DT313H-MD should be conﬁgurable for

various properties such as user proﬁles, network features, and several system elements.

Wireless Networking

Wireless LAN

The DT313H/ DT313H-MD is often delivered with an embedded (user-inaccessible)

802.11a/b/g/n WLAN adapter equipped with a hidden custom antenna.

•

Through the support of typical WLAN adapters, the DT313H/ DT313H-MD should be

able to detect all 802.11 access points in the vicinity for you to select the access point

of your choice for connection.

•

The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT313H/ DT313H-MD

and the access points have to match. The SSID is case-sensitive and it is recommended

that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure

access.

•

When WEP/WPA/WPA2 is enabled, you may need to consult your network

administrator or your networking equipment literature to properly conﬁgure

associated settings such as Authentication mode, etc.

•

Refer to the access point operating manuals for setting up the 802.11 access points.

ENGLISH