DT Research DT430SC Basishandleiding

Blader online of download pdf Basishandleiding voor {categorie_naam} DT Research DT430SC. DT Research DT430SC 2 pagina's. Handheld pos terminal

DT430SC
DATA CAPTURE SPECIFICATIONS:
RFID
Frequency
13.56MHz ±7KHz
Reading Range
within 30mm depending on type of tags
Protocol
ISO 15693, 14443A (B) and 18000-3 mode-1
Barcode Scanner (1D)
Code128, EAN-13, EAN-8, Code-39, UPC-A, UPC-E, Codabar,
Decoded Mode
Interleaved 2 of 5, ISBN/ ISSN, Code93. etc
Scan Rate
Up to 300 scans/ sec
Scan Angle
Horizontal: 42°
Print Contrast
≥ 30%
Barcode Scanner (2D)
1D: EAN/UPC, GS1 Databar, RSS, Code 39, Code 128, UCC/ EAN
128, ISBN, ISBT, Interleaved, Matrix, Industrial and Standard 2 of 5,
Codabar, Code 93/93i, Code 11, MSI, Plessey, Telepen, postal codes.
(Australian Post, BPO,Canada Post, Dutch Post, Japan Post, PostNet,
Decode Mode
Sweden Post )
2D: Data Matrix, PDF417, Micro PDF 417, Codablock, Maxicode, QR,
Aztec, GS1 Composite codes, Direct Part Marking Reading multicodes
and barcodes on mobile phone screens available.
Scan Rate
1D: 120 fps, 2D: 60 fps
Scan Angle
Horizontal: 34.4°; Vertical: 22.2°
Optical Resolution
752 (H) x 480 (V) pixels
Print Contrast
Down to 30%
* Specifications subject to change without notice.
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2012, DT Research, Inc.
All Rights Reserved. DT Research is a registered trademark of DT Research, Inc.
BOG081012DT430SCENG
4
ENGLISH
signage dtri com
http://www.dtresearch.com
Handheld POS Terminal
DT430SC
BASIC OPERATION GUIDE
ENGLISH
INTRODUCTION
Thank you for acquiring the DT430SC, part of the POS
Handheld line. The DT430SC offers a 4.3" outdoor-
viewable display, in a compact, rugged, and lightweight package. The DT430SC enables
efficient point-of-service applications, inventory management, and field services. IP54
rated for water and dust resistance with IP65 sealed front panel, the DT430SC performs
indoors, outdoors, and in harsh environments.
The DT430SC Point-of-Service Handheld provides the precise features needed to
streamline operations and improve productivity, data accuracy, and service.
PACKAGE CONTENTS
1.
ne DT430SC
O
2.
ne battery pack
O
3.
Basic operation guide
4.
Stylus lanyard and hand strap
*
The actual package contents may vary depending on the configuration acquired.
PRECAUTIONS
Always exercise care when operating and handling the DT430SC.
Do not disassemble any portion of the DT430SC. It will void any product warranty on
DT430SC.
Do not use any power adapter or charging cradle other than the one provided with the
device or acquired from the manufacturer or its partners.
In the unlikely event that abnormal noise, strange odor, or smoke is present,
immediately power down the DT430SC and disconnect all power sources. Please
report the problem to your device provider immediately.