ATTO Technology R348 v Installatie- en bedieningshandleiding - Pagina 10

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} ATTO Technology R348 v. ATTO Technology R348 v 20 pagina's. Raid adapter

Pagina afdrukken
After installing drivers, install the ATTO ExpressSAS adapter into a PCI Express expansion slot on your
computer.
CAUTION
CAUTION
Back up your system data before
changing or installing any hardware.

System requirements

The ATTO ExpressSAS host adapter package contains
the host adapter, the ATTO Utilities CD and a warranty
and registration card. If any of these items are missing,
contact your ATTO authorized sales representative.
To install and use the ATTO ExpressSAS host adapter
you need
• A computer with an available PCI Express
expansion slot.

Installation

WARNING
ATTO ExpressSAS host adapters contain
components that are sensitive to
electrostatic discharge (ESD). ESD can
cause damage to the ATTO ExpressSAS
host adapter. Please follow standard
methods to avoid ESD.
1
Install system drivers before you begin
hardware installation. Refer to
page 3.
2
Power down the computer and unplug the computer
from all power sources.
3
Open the case.
4
If applicable, install the ATTO battery pack. Refer to
Exhibits 3-4 and 3-5.
WARNING
Risk of explosion if the battery is replaced
by an incorrect type. Only use battery
packs approved by ATTO Technology Inc.
a. Place the battery pack on the
ExpressSAS adapter.
b. Secure the battery to the card using the
tie-wrap included in the battery
installation kit.
5 ATTO Technology Inc. ATTO ExpressSAS Host Adapter Installation and Operation Manual

3 Install hardware

• The complete ATTO ExpressSAS host adapter
Refer to Exhibits 3-4, 3-5, 3-1, 3-2, 3-3 and 3-5 for
details of the adapters and brackets.

SAS address

Each ATTO ExpressSAS adapter has a unique SAS
address designated by the Institute of Electrical and
Electronic Engineers which allows the system to
recognize the ATTO ExpressSAS host adapter as a
unique part of your configuration.
The address is clearly marked on the back of the board
for easy identification. Please keep a reference copy of
the number in a safe place.
5
Install drivers
on
6
7
package.
c. Place the battery plug into the PCB
header. The plug is polarized and will
only fit in one way.
CAUTION
CAUTION
Dispose of used batteries according to
the instructions included with the
batteries.
Insert the ATTO ExpressSAS host adapter into any
open PCI Express expansion slot. If you have
questions about how to install an expansion card in
your system, consult your computer's
documentation.
Close the case on the computer and power it up.
Installed drivers are loaded.
For Windows XP and Server 2003
• Windows detects your ExpressSAS Adapter
and the Found New Hardware wizard
appears. Proceed through the wizard with
the default settings for each adapter
channel. Insert the ExpressSAS installation
disk when prompted.
• Windows XP only: After adapter installation
is complete, the Found New Hardware
wizard shows an ATTO Phantom Device
for each channel. Proceed through the
wizard with default settings to complete the
installation.