DT Research MA1356 Basishandleiding - Pagina 2

Blader online of download pdf Basishandleiding voor {categorie_naam} DT Research MA1356. DT Research MA1356 2 pagina's. Multi screen appliances

Pagina afdrukken

HDMI Video-out Ports

MA1352

Front View

3840 x 2160 @ 24Hz

1920 x 1080 @ 60Hz

3840 x 2160 @ 24Hz

1920 x 1080 @ 60Hz

MA1356

Front View

3840 x 2160 @ 24Hz

1920 x 1080 @ 60Hz

3840 x 2160 @ 24Hz

1920 x 1080 @ 60Hz

Connecting Peripherals

Make sure your monitors are connected the MA Appliance with HDMI cables. After the

peripherals are well connected, plug the power cord into the Appliance and insert the other end

into a power outlet.

NOTE: DO NOT connect the power cord before connecting all cables to the MA Appliance.

Using Cable Extenders

To be compatible with the MA Appliance, the extenders should have EDID management

function. If there are display issues due to the video cable extenders, please contact your local

reseller or system integrator to recommend veriﬁed extenders.

ENGLISH

Rear View

1920 x 1080 @ 60Hz

Precautions

•

Always exercise care when operating and handling.

•

Never disassemble any portion of the enclosure, as this will void any product warranty.

•

Do not use any AC/DC adapter other than the one provided with the device or acquired from

the manufacturer or its partners.

•

In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately

power down the product and disconnect all power sources.

•

Please report the problem to your device provider immediately.

•

Pushing on the Power Button again will restart the appliance.

Powering ON and OFF

The Power Button is located on the back of the MA Appliance.

To turn the MA Appliance on, push and release the Power Button on the front bezel. The power

LED will be lit (blue), and the corresponding interface will be shown on the display monitors.

To turn oﬀ the appliance, use the software shutdown interface provided.

If your MA player hangs up, please restart it from WCM or RDP rather than pressing the power

button to restart, otherwise the OS may become corrupted.

Connect Player and Register to WCM Server

When you power on your Multi Screen Appliance, the registration dialog will be launched

automatically. You can also launch it from Start | All Programs | DT Research | WebDT Signage

Player | Register Player Again.

NOTE: If your signage player is located in a LAN with a WCM server, the player will automatically

Registration Information:

Player name: Leave default name or give a new name

Group name: If you did not create a group in WCM

server yet, leave it blank now

Organization name: my site (default)

Access Password: 123456 (default)

Publish Server URL:

http://(server IP address): (port number)/publish

or, http://localhost: (Port number)/publish

•

To exit the full screen introduction, press "Ctrl+Shift+Space" to exit the WebDT Signage Player.

•

To re-launch the WebDT Signage Player,

navigate to Start | All Programs | DT Research |

WebDT Signage Player | Start player.

•

another WebDT Content Manager Server, navigate to Start

To register this signage appliance to

| All Programs | DT Research | WebDT Signage Player | Register Player Again, and then the

Player Registration dialog will be launched. Fill in all ﬁelds to register. Click OK to register and

connect to the preferred WebDT Content Manager Publish Server.

•

Please refer to documentation included in the DVD of your package to start

content, playlists and schedules via WebDT Content Manager.

managing your

ENGLISH