AirTools RC-6000 Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} AirTools RC-6000. AirTools RC-6000 2 pagina's.

QUICK START GUIDE: RC-6000 Remote Control

REAR PANEL

ITEM
CONTROL INTERFACE
Connections
After installing the 6000 or 6100 in its permanent position,
you may connect the RC-6000. Position the RC-6000
Remote Control in a convenient but secure location. Route
the 25-foot cable between the two devices. Secure the
cable so that it is not a tripping hazard or located where
it could be damaged by moving equipment or furniture.
Connect the Male end of the supplied cable into the Female
connector on the RC-6000 labeled CONTROL INTERFACE.
Connect the Female end of the cable into the Male
connector on the rear of the 6000 or 6100 labeled REMOTE
CONTROL & INDICATORS.
6408 216th Street SW
|
Mountlake Terrace, WA 98043 USA
T
+1.425.778.7728
F
+1.425.778.7727
RC-6000
REMOTE CONTROL
www.SymetrixAudio.com
CONTROL INTERFACE
DESCRIPTION
25-pin Female D-sub
AIRTOOLS 6100
REMOTE CONTROL & INDICATORS
1
AUTOMATION
25
RC-6000
REMOTE CONTROL
www.SymetrixAudio.com
CONTROL INTERFACE
AIRTOOLS RC-6000
| www.symetrix.co
Rear Panel and Connections
ENGINEERED AND ASSEMBLED OF U.S. AND IMPORTED MATERIALS
BY SYMETRIX, INC. MOUNTLAKE TERRACE, WA USA
THIS UNIT CONTAINS NO USER SERVICEABLE PARTS
CONÇU ET ASSEMBLÉ DES MATÉRIAUX DES ÉTATS UNIS ET
IMPORTÉS PAR SYMETRIX, INC. MOUNTLAKE TERRACE, WA USA.
PAS DES ELEMENTS SERVIABLE PAR UTILISATEUR
DETAILS
Enables data transfer between the RC-6000 and the 6000 or 6100.
Need a Longer Cable?
The RC-6000 uses a straight-through 25 conductor cable.
A standard computer parallel "printer" cable will also suffice.
The maximum supported length is 100 feet.
ENGINEERED AND ASSEMBLED OF U.S. AND IMPORTED MATERIALS
BY SYMETRIX, INC. MOUNTLAKE TERRACE, WA USA
THIS UNIT CONTAINS NO USER SERVICEABLE PARTS
CONÇU ET ASSEMBLÉ DES MATÉRIAUX DES ÉTATS UNIS ET
IMPORTÉS PAR SYMETRIX, INC. MOUNTLAKE TERRACE, WA USA.
3
PAS DES ELEMENTS SERVIABLE PAR UTILISATEUR