Attop F16 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Attop F16. Attop F16 16 pagina's.

Remote Control and Aircraft Battery Installation and Charging Instructions

Remote control battery installing

Drone battery charging

(1) Remove the battery from the aircraft.

(2) Connect the battery to the specific charging

cable, and then insert the cable into the

charging equipment such as the USB power

supply.

(3) When the remote control is charged,

the indicator lights up while be off when charging completion.

Note： Use an power supply with standard output voltage 5V and current greater than or

equal to 2A, otherwise there is a risk of overloading the USB cable and Battery.

The flight time is about 15 minutes and the charging time is about 120 minutes.

3.Installation and startup of aircraft battery

Put the fully charged battery into the battery slot of the aircraft and hold down the

power switch until the aircraft lights up.

Aircraft installing

1.Folding

Put the battery correctly according

to the electrode instructions (+,-) of

the battery box as shown

Drone battery

USB charging cable