Attop X-PACK 3 Bedieningshandleiding - Pagina 3

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Attop X-PACK 3. Attop X-PACK 3 5 pagina's.

Speed Adjustment
Press the speed switch to change the speed gear while
Speed ±
flying. There are 3 gears, press the Speed switch, you will
hear "beep, beep", means it is on the second gear speed.
Press again, you will hear "beep, beep, beep" means it is on
the third gear speed. Press again, you will hear "beep"
means it is back to the first gear.
Remark: Beginners would be suggested to use the first
8. Throw-to-fly function
9. Return-to-home function
In regular mode, when the drone fly forward, stand and make sure the remote toward the tial of
drone then press the "Right function switch" to activate headless mode, no matter which direction
that the drone heading to, keep pressing the "Right function switch" about 3 seconds, the drone
would fly straight back to remote location.
Note : 1. The drone will not land itself when operate this function, just fly straight toward the remote
direction, negative direction operate the right stick to stop flying.
2. If you change your position while playing, Return-to-home function will be inaccurate.
Now turn the drone's tail toward the remote, then press the "Right function switch" to
activate headless mode, and keep pressing the "Right function switch" about 3 seconds,
then It will come back successfully. Or you can also face to the dorne's tail and calibrate
the gyroscope after it lands. Such operation is to update the drone's return direction.
11.Photograph and Video
Take Photos
Take Photos:Press the button of "take photo". Please make sure to open the app on your
smart phone before using it, then you can review the photos taken in the media
file of app.
Video:Press the button of "take video", press to start and press again to finish and save
the video. Please make sure to open the app on your smart phone before using it,
then you can review the videos taken in the media file of app.
12.Aircraft Parameters
Propeller dia.:
Aircraft:
Total weight:
Battery:
Charging time:
Flight time:
Gyroscope:
Working temperature:
Remoter controller:
Motor:
Remote Controller Parameters
Effective Control Range:
Wifi Transmission Range :
(in a wide open area with no electromagnetic interference)
Working frequency:
gear speed firstly to play until skillful.
After pairing and calibration completed, you can hold
the aircraft in your hand, and then horizontally throw
it out. The aircraft will automatically activate the
propellers and fly in the air.
Note: It is better to operate the calibration step again
after operating Throw to fly for several times.
The function will be more stable.
8
Video
80mm
100X125X40mm
73g±2g
3.7V500mAh
About 90 mins
8-9 mins
built-in
-10°C to 40°C
2.4G
7*20 4pcs
50 meters
30-40 meters
2.4G
Battery:
3xAAA
10
10.Headless Mode Function
Press the "Right function switch" when the indicator lights slowly flashing, means it is in
Headless Mode.
Press the "Right function switch" again, when the indicator lights stop flashing, means that the
Headless Mode is diactivated.
Front
Back
Headless Mode
Users is recommended to stay same orientation as the drone head is facing when the
drone takes off.
Headless Mode, the forward direction is same as the direction when the drone took off,
where the head of drone was facing.
In order to make sure the users can clearly identify drone's direction, we suggest that
users better to stay in the same orientation as the drone facing when it takes off.
Then no matter which direction the head is facing, the drone will lock the controlled
direction as the remote controller, easy to control back the drone.
13. FAQ
ISSUES
After the battery is
insertedin the drone,
Frequency matching
indicator lights on
1
between remote and
drone keep flashing,
receiver not successful
no response to
operations
1.Check if the power
for remote and drone
No response after
is full charged.
2
battery is inserted in
the drone
2.Connection of the
poles are not good
Motor does not run
when operating the
Power for the Li-Poly
3
throttle stick and the
battery is not enough
indicator lights on
drone keep flashing
1. Some of the blades
Main motor blades
have been deformed
4
spin but the drone
2. Battery power is
won't fly
not enough
Front
Front
Back
Back
Origin
Headless Mode
Headless Mode
9
CAUSE
SUGGESTIONS
Reoperate the frequency
matching for remote
and drone (please refer
to P.4 for details)
1.Open the remote
battery case and make
sure if the battery is
inserted in right position
2. Use a fully charged
battery
3. Reinstall the battery
and confirm whether it is
good connecting with the
poles well.
Charge the battery or
replace it with a
full-charged battery
1. Replace the main
blade
2. Charge the battery or
replace it with a fully
charged battery
11