dtec GJD 350 Installatie- en installatiehandleiding - Pagina 7

Blader online of download pdf Installatie- en installatiehandleiding voor {categorie_naam} dtec GJD 350. dtec GJD 350 12 pagina's.

Installation & Set Up Guide

Stage3 –

Beam Alignment (Cont.)

fig. 9

Stage 4 –

Programming

The user can individually programme a number of configurable settings as

illustrated in the programming chart. Factory settings are shown as shaded boxes.

Changes to the existing settings can easily be made. To reset the factory settings

simply remove power form the detector, press and hold the programme button

(fig. 10) whilst temporarily applying power to the detector: either before installation,

with a PP3 battery, or by applying 12 Volts to the unit on site.

fig. 11

fig. 10

Programme Button

Blue LED