DTEN D7 Gebruikers- en installatiehandleiding - Pagina 9

Blader online of download pdf Gebruikers- en installatiehandleiding voor {categorie_naam} DTEN D7. DTEN D7 12 pagina's. 55''
Ook voor DTEN D7: Gebruikers- en installatiehandleiding (14 pagina's), Gebruikers- en installatiehandleiding (12 pagina's), Producthandleiding (2 pagina's), Handleiding voor snelle installatie (9 pagina's), Producthandleiding (2 pagina's)

DTEN D7 Gebruikers- en installatiehandleiding
W A L L M O U N T I N G
IMPORTANT
The Monitor must be mounted safely and securely.
Mounting and installation should only be performed
by experienced or professional personnel.
FAILURE TO PERFORM THIS WORK CORRECTLY
MAY RESULT IN BODILY HARM TO USERS OR
DAMAGE TO THE EQUIPMENT.
྇ Pay special attention to the type of wall
construction.
྇ Only use walls or surfaces capable of accepting the
weight of the monitor.
྇ On concrete or block/brick walls, mount the
brackets with the masonry screws and plugs
supplied,
using a 13mm masonry drill.
(M6)
྇ Each mounting bracket must be secured with at
least four mounting screws.
྇ With Stud/Drywall construction, each bracket
must be attached to at least two studs with two
cabinet grade mounting screws into each stud.
Make sure to center screws on studs; failure to do
so may be dangerous.
྇ If studs are not conveniently located or if the
wall is unsuitable in some other way, it may be
necessary to first mount a backing board of at least
3/4 inch or 18mm high grade plywood. Attach
the backing board firmly, then use at least eight
suitable wood screws or bolts to attach each
bracket to the backing board.
DTEN
D7 Dual 55" User Manual v 1.3.0 Page 15
You will need:
— Power Drill with wood or masonry bits
— Screwdrivers
— Level, Tape Measure
— Stud Finder (for drywall construction)
1245cm/490in
Before proceeding, ascertain the type of wall construction in the chosen
location. Attach the Mounting Bracket with regard to the 'Safety Notes'
opposite. The top of the Wall Bracket should be at approximately eye
level when standing. Use a level to align and straighten the mounting
bracket before using at least four screws to attach the bracket to the wall
surface. For masonry walls, use the screws and plugs supplied. For stud
construction, use cabinet grade mounting screws directly into the studs.
DTEN
D7 Dual 55" User Manual v 1.3.0 Page 16
A T T A C H M O U N T I N G B R A C K E T
Eye Level
Min spacing:
Wall Bracket
100cm/40in