Addendum DES-3205 Aanvullende handleiding - Pagina 5

Blader online of download pdf Aanvullende handleiding voor {categorie_naam} Addendum DES-3205. Addendum DES-3205 5 pagina's. D-link des-3205: supplementary guide

Pagina afdrukken

Press the F4 or X keys to exit the Filtering Data Base menu

and return to the main menu.

The following represents an explanation of the selection and input

parameters for the Filtering Data Base Menu:

♦ Port Number. This selection can be set from ports 1 to 5,

and it is not required that all of the five ports of the Switch

be used in the Filtering Data Base. MAC addresses can only

be typed in for one port at a time.

♦ Filter State. This selection can be toggled (using the Space

bar) between three settings: Disable, Forwarding and

Blocking.

◊ Disable. This selection of the filter state disables the

process where forwarding or blocking is not possible. In

this setting, ALL packets will be discarded. This is the

Default for all ports in the Switch.

◊ Forwarding.

This selection of the filter state enables

the forwarding process to perform forwarding of an

incoming packet. A packet with a MAC address that

matches any address in the sixteen MAC address user

defined table will be forwarded. Otherwise, the packet

will be discarded.

◊ Blocking. This selection of the filter state will compare

all incoming packets to check if it matches one of the

sixteen MAC addresses specified by the user. In the case

of a match, the packet will be discarded. Otherwise, the

packet will be forwarded.

♦ 1

MAC Address ~ 16

user defined MAC address entries can be inputted. These

entries must be accurate in order for proper management

and handling of packets. Also, it is not required that all of

the sixteen MAC addresses be used.

MAC Address.

This is where