DTM System DTM-SWIFT 350 Montage-instructies voor de installateur - Pagina 3
Blader online of download pdf Montage-instructies voor de installateur voor {categorie_naam} DTM System DTM-SWIFT 350. DTM System DTM-SWIFT 350 16 pagina's. Actuators for swing gates
Pagina afdrukken
AUTOMATION MUST BE IMPLEMENTED IN ACCORDANCE WITH EUROPEAN STANDARDS:
EN 12100
(Safety of machinery. Electrical equipment of machines. General requirements)
EN 12445
(Gates. Safety in use of power operated doors. Test methods)
EN 12453
(Gates. Safety in use of power operated doors. Requirements)
The installer should provide the device with a residual current circuit breaker ensuring that the devices are
=
disconnected from the power supply (EN 60335-1).
Automatic swing gates should comply with the standards as well as with any applicable local regulations.
=
The electrical installation to which the automation is connected must comply with the applicable standards
=
and be properly made.