Comtek BST-50b Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Comtek BST-50b. Comtek BST-50b 16 pagina's. Synthesized base station transmitter (72-76mhz)

Pagina afdrukken
BST-50b SPECIFICATIONS
Audio Inputs:
•
Mic XLR, 600 ohm Balanced -40
dBV (nominal)
•
Line XLR, >10 k ohm Balanced 0
dBV (nominal)
Connectors:
•
XLR-3 Female audio input
connector for mic and line input
•
XLR-2 Male power input 12
volts
•
BNC type RF output connector
Operation Indicators:
•
LED Bargraph VU Meter
displays audio input
(modulation)
•
Two Digit Alpha Numeric Display
shows operating channel
•
Five Digit Numeric Display
shows operating frequency
•
Antenna Indicator displays
deficient antenna condition
•
Lock Out Indicator shows
tuning has been disabled
Antenna:
•
Telescopic antenna mounts
directly into top of transmitter
•
BNC RF output connector for
optional external antenna
FCC Compliance:
Type Accepted under Part 90
Power Requirements:
12 Volts DC, 300 mA max
Frequency Response:
80 Hz to 10 kHz
Audio Distortion:
Less than 0.5% at 80% modulation
Modulation Limiter:
Soft compressor type with high
(25 dB) linear overload protection,
attack time less than 1 ms,
recovery time 10 ms
Audio Gain Control:
Greater than 40 dB
Test Tone Generator:
400 Hz .5% distortion
Frequency Modulation:
10 kHz deviation
RF Output Power:
Set for 120 mW for FCC Part 90
Frequency Stability:
Better than 0.002%. digitally
synthesized, crystal controlled
Operating Frequency:
72.020 to 75.980 MHz
Harmonic and Spurious
Emissions:
Better than 55 dB below carrier
Dimensions:
1
6
/
" wide x 1
2
deep
Weight:
44 oz.
NOTE: Specifications subject to change
without notice
Page 12
3
5
/
" high x 5
/
"
4
8