AU Optronics BenQ PM060MB2 Installatiehandleiding - Pagina 10
Blader online of download pdf Installatiehandleiding voor {categorie_naam} AU Optronics BenQ PM060MB2. AU Optronics BenQ PM060MB2 20 pagina's. Solar photovoltaic modules
Pagina afdrukken
3.2 Mounting with Clamps
• The clamping clips on the side frame must be in parallel (see Figure 1).
• Ensure the clamps are of sufficient design strength to allow for the maximum design
pressure of the module.
• Measurements of D1, D2, D3, and D4 below describe the centerline of the mounting
clamp to the edge of the module frame.
• Clips and clamps are not provided by BenQ Solar.
• There are two clamping methods available (see below for specific measurements):
o Clamp on the long side of the frame (see Figure 2, measurements below)
o Clamp on the short side of the frame (see Figure 3, measurements below)
2013/7/25
Figure 1 1 1 1 Top view and back view of installed module
Figure
Figure
Figure
Figure 2 2 2 2 Long rail mounting clamp range (D1 and D2)
Figure
Figure
Figure
9