Auber Instruments WS-1211GPH Beknopte handleiding - Pagina 10
Blader online of download pdf Beknopte handleiding voor {categorie_naam} Auber Instruments WS-1211GPH. Auber Instruments WS-1211GPH 12 pagina's. Programmable precision pid temperature controller
Pagina afdrukken
To recall a recipe, press and hold SET key for 3 seconds until the Parameter Window displays
"LoCK". Release the SET. The display will show "0". Use "+" and "-" keys to adjust the display to
1 and press SET. The display will show "rC" for a second and then the value "End". If press SET
key now, you will exit this mode without overwriting any existing programs. This can prevent your
current program been accidently overwritten by a recalled program. Use "+" or "-" key to locate
recipe
you
want
"End", "b1", "b2", "C1", "C2", "F1", "F2", "P1", and "P2" one by one. After you locate the recipe that
you want to recall, press the SET key to select. Current program will be overwritten by the selected
program.
7. Single-step mode
In this mode, the controller will hold temperature at one set value (C-1) continuously as long as
the controller is powered on. Even if the controller is powered off and turned on again, it will
resume working in this mode. You do not need to enter any other program steps in this mode. For
details on how to access these parameters, please check section 7 of the main instruction
manual.
To enter the single-step mode, the user need to set the parameter "PrG" to "off". Under the normal
operating mode, to recall a recipe, press and hold SET key for 3 seconds until the Parameter
Window displays "LOCK". Release the SET. The display will show "0". Use "+" and "-" keys to
adjust the display to 3 and press SET. The display will show "PrG" for a second and then the value
"on". Use "+" or "-" key to toggle between "on" to "off". Select "off" and press SET key if you want
to enter the single-step mode. Otherwise, select "on" and press SET key to enter the program
mode. The controller will go back to the normal operating mode. To set the temperature, press
SET key once, and the left window will show "C-1". Use "+" or "-" key to adjust the temperature in
the right window, then press SET to save and exit.
In single-step mode, the save and recall function (Section 7) still work. But the change can only
be applied to C-1, i.e., you can only store your current set temperature to the C-1 in a selected
recipe, or recall the C-1 temperature from a selected recipe to the current set temperature. Other
data will remain in the memory of controller but is not accessible under the single-step mode. To
exit the single-step mode, you only need to change the "PrG" value to "on".
Please note: In older versions, it may show PrG options as "y" or "n", instead of "on",
"off". To enter single-step mode, please select "n".
8. Examples
8.1
Store your program as a recipe (Program Mode)
Before you input your program, check the PrG = on (accessed by LoCK code "3"). Press SET
briefly, and enter the program below:
C-1=120, t-1=2.0;
to
recall.
If
you
press
"+"
key
repeatedly,
10
you
will
see