Auber Instruments WSD-1200GPH Beknopte handleiding - Pagina 3

Blader online of download pdf Beknopte handleiding voor {categorie_naam} Auber Instruments WSD-1200GPH. Auber Instruments WSD-1200GPH 14 pagina's. Programmable pid temperature controller with dual probe

Pagina afdrukken

4) Smoker generator control output status indicator. When lit, the smoker

generator control output is on. When off, the output is off.

5) Timer status indicator - When lit, right window shows the time passed since

power up. When it is off, right window shows the current temperature detected by

the probe 2.

6) SET Key - For showing current temperature settings, entering parameters setting

mode and confirming various actions taken.

7) "-" Key - To decrement displayed values when controller is in the parameter

setting mode. During normal operation, press it to cancel the alarm.

8) "+" Key - To increment displayed values when controller is in the parameter setting

mode. During normal operation, pressing it will change the left window from

temperature to display which step the program is at.

9) Time Key - Changes the display in the right window between current timer and

temperature values.

2. Connecting and operating the controller

Install the sensor.

(Note: If you ordered wall mount sensor instead of free hanging sensor, please see the

separate instruction in the CD for its installation)

The controller is supplied with two probes. The one with the short tip is for measuring the

cabinet temperature. We name it probe 1. It needs to be plugged to the top sensor jack

Figure 2. Back Panel