Auber Instruments JSL-72 Gebruiksaanwijzing

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Auber Instruments JSL-72. Auber Instruments JSL-72 3 pagina's. Timer for coffee grinder
Ook voor Auber Instruments JSL-72: Gebruiksaanwijzing (3 pagina's)

Pagina afdrukken

AUBER INSTRUMENTS

Instruction Manual

Overview

This JSL-72 timer is specifically designed for controlling coffee grinder. It can

count from 0.01" to 99.99" or from 1" to 99'59". Counting direction can be set

by user (counting up or counting down). Accumulated time/ cups can be

automatically stored in the timer and reset by user. Operating function modes

include single dose, double dose and manual. Most function features can be

activated by front key pad or remote switch. However, manual function can

only be accessed through remote switch. Three different display modes can be

programmed. User can shift among single/double dose display mode, total

running time display mode, and total number of cups display mode. Timer

adjust function can be deactivated to prevent any accidental change.

2. Specification

Timer range: 0.01" to 99.99", or 1" to 99'59".

Timer mode: single dose, double dose, or manual.

Timer trigger: power on, front key pad, or remote switch.

Timer accuracy: < 1 s/day.

Power supply: 90 - 260 V AC or DC.

Power consumption: < 2 W.

Relay output: 7 A @ 240 VAC, 10 A @ 120 VAC and 24 VDC.

Relay life: 100,000 times.

Operating temperature: 0 - 60° C.

Humidity: 0 - 95% RH.

Panel cutout: 44.5 x 44.5 mm.

Outer dimension: 48 x 48 x 85 mm.

3. Front Panel

Figure1. Front panel

. Time range indicators: M for minutes. It will be illuminated when time base is

MM:SS (Minutes: Seconds). It will be off when time base is SS.SS (Seconds).

2. Timer indicators: T1 is illuminated for single dose; T2 is illuminated for

double dose.

3. OUT indicator: illuminated when relay is on; turns off when relay is off.

4. SET key. When timer is not running, in single/double dose display mode,

press it will shift between single dose time (T1) and double dose time (T2) (see

section 5.1 for details); press and hold it for 3 seconds will shift between

single/double dose display mode and total running time/cups display mode

2018.02

JSL-72 Timer for Coffee Grinder

Version 2.1 (Feb, 2018)

(see section 5.1 for details); press and hold it for 5 seconds will enter the

parameter programming menu (see section 5.2 for details).

5. Down key: When timer is not running, in single/double dose display mode,

press it will lower the time setting value; in total running time/cups display

mode, hold it for 4 seconds will reset the value.

When timer is running, in either display mode, press it will stop the timer. In

programming mode, press it will go to the next programming value.

6. Up key: When timer is not running, in single/double dose display mode,

press it will increase the time setting value. When timer is running, press it will

stop the timer. In programming mode, press it will go to the previous

programming value.

7. RST key: Reset key. When timer is not running, press it will activate the

timer. When timer is running, press it will stop the timer.

8. LED digital display. In single/double dose display mode, the top displays the

actual time; the bottom displays the set value. In total running time/cups modes,

the top displays the accumulated running time/cups; the bottom displays

tot/CuPS. In programming mode, the top displays setting parameters; the

bottom displays programming value.

4. Terminal Assignment

Terminal functions when timer is running

1. Terminal abbreviations: MAN (manual), T2 (double dose time), T1 (single

dose time), COM (common), RSV (reserved).

2. Connecting MAN and COM: timer starts running when they are connected.

3. Connecting T2 and COM: Timer starts running for T2 when they are

disconnected.

4. Connecting T1 and COM: Timer starts running for T1 when they are

disconnected.

5. Terminal 6, 7 and 8 are relay outputs. Terminal 6 & 7 are normally closed

(NC), terminal 7 & 8 are normally open (NO). When output relay is deactivated,

terminal 6 & 7are jumped and terminal 7& 8 are isolated. When output relay is

activated, terminal 6 & 7are isolated and terminal 7& 8 are jumped.

6. Terminal 2 (RSV) is reserved for customized applications.

5. Programming

When timer is not running, press SET key for 5 seconds to enter the

programming menu. For each parameter setting, use up/down key to select

different programming values. Press SET key to confirm and move on to next

WWW.AUBERINS.COM

Figure 2. Terminal assignment

P1/3